Lab Finished Props
#14
Guest
Posts: n/a
Valley Propeller service
In Ventura calif. Has been
where I have had most work
done, They were next door
to Team Scarab and did the
Props for the Navy Boats
And a lot of Scarab race
Boats.
805-644-5056 ask for Brian
805-644-0243 Fax
He is very busy this time
of year.
Tell them Mike J. said to
call and ask for the OSO
prices.
In Ventura calif. Has been
where I have had most work
done, They were next door
to Team Scarab and did the
Props for the Navy Boats
And a lot of Scarab race
Boats.
805-644-5056 ask for Brian
805-644-0243 Fax
He is very busy this time
of year.
Tell them Mike J. said to
call and ask for the OSO
prices.
#15
Registered
Join Date: Mar 2002
Location: US Virgin Islands
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
York all the way... I just got my 24 Bravo 1's back and I don't want to put them on the boat! They look too pretty! I will be doing a speed run this weekend and will post the results, but I am confident in performance. Turn around time for me was 8 biz days.
Mongo
Mongo
#16
Registered
"Tommy" at Warlock Performance Marine in California said that they have tried many other lab finished props from several other props shops, but haven't found anyone more consistant and with better results than York Propeller. They were willing to try the others in the past, but have always come back to York-----at least for now anyway. You all can call Tommy at WPM and get the scoop from him---he's pretty straight forward. 909-371-7567
I'm pretty sure "Audacity" Joe now uses York for his personal boat and his race boat at this time. Perhpas he may have some input here.
I'm pretty sure "Audacity" Joe now uses York for his personal boat and his race boat at this time. Perhpas he may have some input here.
Last edited by KAAMA; 07-12-2002 at 07:14 AM.
#17
Registered
Join Date: Jun 2001
Location: Michigan
Posts: 3,345
Likes: 0
Received 0 Likes
on
0 Posts
yes john does a good job...i use a set of his on my poker boat...i do the props for the race boat! i have props for different conditions that are the same pitch but perform completly different!!! KAMMA....buy my boat!
#18
Registered
Join Date: Nov 2000
Location: NJ
Posts: 560
Likes: 0
Received 0 Likes
on
0 Posts
Kamma, Enticer,
Sorry to hear about your bad Exp. with Mercury. I have only had good luck with the props they have worked on. I thought I read an piece done in HB, a shoot out of sorts between Merc. and some other Co.s, and Merc. came out the fasteset on Props
Philip
Sorry to hear about your bad Exp. with Mercury. I have only had good luck with the props they have worked on. I thought I read an piece done in HB, a shoot out of sorts between Merc. and some other Co.s, and Merc. came out the fasteset on Props
Philip
Last edited by Philip; 07-12-2002 at 10:24 AM.
#19
Registered
Join Date: Sep 2001
Location: Houston, TX, USA
Posts: 2,287
Likes: 0
Received 0 Likes
on
0 Posts
Called John @ York last night about my problem. I was very pleased with conversation with him. One thing I liked about what he said was with the HP I was running he did not like to thin the blades 2 much.
Last weekend friend of mine threw a blade on his lab finished (by Mercruiser) prop. We started checking into why & was told since we got more than 2 years (2 years & some months) on a labed prop we were lucky it lasted that long. I never knew getting a prop lab finished made it so weak that you need to replace them every other year.
After this weekend I will be sending my prop off to him.
Last weekend friend of mine threw a blade on his lab finished (by Mercruiser) prop. We started checking into why & was told since we got more than 2 years (2 years & some months) on a labed prop we were lucky it lasted that long. I never knew getting a prop lab finished made it so weak that you need to replace them every other year.
After this weekend I will be sending my prop off to him.