Gil Manifold Owners.. Help!!!!!
VIP Member
07-14-2002, 02:35 AM
#3
Guest
Posts: n/a
Its a 502 carb.. heres what i cant figure out. there is 2 plates about 6x5 ican where it lines up nicely with the shifter assembly. The other one could go on the other side to attach the ign. module.
BUT ! there is 4 brackets made from flat iron bent into a modified Z with holes on ea. end and with side gussets. 2 are identical , 1 is the same ize and shape but has a flange welded about 1/2 way up with hole drilled in the flange. the last of the 4 is the same shape , about an inch longer with no side gusset. Im guessing they are for the oil filter bracket but i cant see needing more than 2 and cant see how exactly to attach the filter brack to them. thanks for the help...sj
BUT ! there is 4 brackets made from flat iron bent into a modified Z with holes on ea. end and with side gussets. 2 are identical , 1 is the same ize and shape but has a flange welded about 1/2 way up with hole drilled in the flange. the last of the 4 is the same shape , about an inch longer with no side gusset. Im guessing they are for the oil filter bracket but i cant see needing more than 2 and cant see how exactly to attach the filter brack to them. thanks for the help...sj
