Calling Uncle Toys!!!
07-18-2002, 04:10 PM
#11
Registered
Thread Starter
Join Date: Aug 2001
Location: Channel Islands, So. Cal.
Posts: 13,836
Received 3,227 Likes
on
1,047 Posts
U.T. Your in box is full bro. I'll see you out in Havasu next weekend.
Tank
Tank
07-18-2002, 11:35 PM
#12
Registered
Join Date: Nov 2000
Location: NJ
Posts: 560
Likes: 0
Received 0 Likes
on
0 Posts
Ut.
Sorry to hear about your motor launch! . I got my issue of HB today, and Tyler Crocket wrote a post about not putting blowers on a motor without forged pistons. Are the pistons in your motors forged?
Philip
Sorry to hear about your motor launch! . I got my issue of HB today, and Tyler Crocket wrote a post about not putting blowers on a motor without forged pistons. Are the pistons in your motors forged?
Philip
07-19-2002, 12:09 PM
#13
Guest
Posts: n/a
Tank – Looking forward to next weekend, hopefully my boat will be running. Water trials yesterday didn’t go well. The new engine was perfect, but the oil pressure was low on the old engine. Stopped and checked the oil (again) and found gas in it. Used the new engine to get back to the dock. Told the guy to take the blower off of that one also. Going back to normally aspirated – DO OVER!
Philip – The pistons are not forged, some new thing called hypertonic (sp?). Kathy is suppose to bring up my new HotBoat mag this weekend. Will check out the article and possibly call the guy. Not sure it matters any more. Believe I am done with blowers for a while.
p.s. Tank, Kathy found the magazine and said it is our boat – kewl. Thanks!
Philip – The pistons are not forged, some new thing called hypertonic (sp?). Kathy is suppose to bring up my new HotBoat mag this weekend. Will check out the article and possibly call the guy. Not sure it matters any more. Believe I am done with blowers for a while.
p.s. Tank, Kathy found the magazine and said it is our boat – kewl. Thanks!
