Hey Marc from BAM>>>>>
#1
Registered
Thread Starter
Hey Marc from BAM>>>>>
I got the gimble bearings and washers you sent this morning at 9:00! I haven't opened the package yet but I'm sure those washers are a pretty easy install---right ?
Thanks again,
Mark/KAAMA
Thanks again,
Mark/KAAMA
#2
Offshoreonly Advertiser
Offshoreonly Advertiser
Yes, don't even pull the cylinders off the boat, just unscrew the end caps, insert spacer, tighten. The only problem is the spanner wrench needed.
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Thread
Thread Starter
Forum
Replies
Last Post
White Knuckles
General Boating Discussion
19
04-08-2008 06:03 PM