Cigarette Cafe Racer
#31
Platinum Member
Platinum Member
Cafe
And if you do buy a Cig I highly recommend Zero Patience if you need work done, his work is top notch and he is one of the good guys in the boating world.
Erik
Erik
#32
Registered
I newer had a problem with porpousing...wth 700hp you should see high 70s mabe 80...I am running 540s about 600 or so and see 77 everyday alittle chop and it will touch 80 now again prop is a 26p b1 that has had a lot of massaging done....
#34
Registered
Platinum Member
Thread Starter
Join Date: Mar 2013
Location: Cambridge, MD
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
I am definitly having a survey done, talked to the guy last night said he can do it sometime next week. Is there anything that i can point out besides the transom and stringer problems? I also have the hull serial number is there anyway to contact cig to find out more.
#36
Registered
Platinum Member
Thread Starter
Join Date: Mar 2013
Location: Cambridge, MD
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
I got the café racer. Been out a few times, working some of the bugs out or should I say getting things the way I want them. Should be fully operational by the end of next week and hope to do some serious boating.