Do glass work?
Platinum Member
09-19-2013, 03:54 PM
#4
Neno the mind boggler
VIP Member
definitely epoxy for that repair 
. . .
(it is certainly repairable to)
. . .(it is certainly repairable to
)
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
09-19-2013, 04:19 PM
#5
Registered
2 cans of Flex Seal should do the trick..... https://www.tryflexseal.com/
Obviously I would never be a good theif. I could never bring myself to cutting the back end of a boat off, with a saws-all, to steal the motors and drives...
Obviously I would never be a good theif. I could never bring myself to cutting the back end of a boat off, with a saws-all, to steal the motors and drives...
09-19-2013, 04:20 PM
#6
Registered
I bet that the thief sawed it because the lacked the ability or the "chop shop" did not have the ceiling height to pull the motors how one would traditionally do it.. Allot easier to roll the motors out with the hull on the ground and cut just in front of them.
Focking criminals! Unbelievable........
Focking criminals! Unbelievable........
09-19-2013, 04:23 PM
#7
Registered
2 cans of Flex Seal should do the trick..... https://www.tryflexseal.com/
Obviously I would never be a good theif. I could never bring myself to cutting the back end of a boat off, with a saws-all, to steal the motors and drives...
Obviously I would never be a good theif. I could never bring myself to cutting the back end of a boat off, with a saws-all, to steal the motors and drives...
09-19-2013, 04:26 PM
#8
Forum Regulator
VIP Member
34' Hustler For Sale
Must be sold!
(Some rigging required)
Must be sold!
(Some rigging required)
