Building the new/old school larry smith 26
#81
Registered
Love the lines of these boats!
#83
Platinum Member
Platinum Member
Thread Starter
fuel tank is finally finished ready to be installed, transom assy. is installed starting an motor mounts tonight. had to do a little repair work on the deck but back on track now will be starting on floor and seat mounts this weekend of course the shop is busy with customers projects now so time is scarce. but we keep forging along. Will post pics soon.
#84
Platinum Member
Platinum Member
Thread Starter
got the motor all dressed and ready to run. Finished painting the engine room today will start installing all the bits for good now no more test fitting. got all my gauges start laying out the dash next should have my steering from IMCO on Tuesday. Just waiting on material to finish the floor and center consul.
#85
Platinum Member
Platinum Member
Thread Starter
Fuel tank is in. Front half of the floor just got Gelcoted and should be installed tomorrow steering system came in all layed out ready to start drilling.
#86
Platinum Member
Platinum Member
Thread Starter
Front floor section is completely polished and sitting in the boat ready to be bonded down. Water pickup is in and sea strainer is installed laying out dash tonight. Building switch panel so I can get out to anodizing tomorrow hopefully. Like to have running by end of next week.
#89
Platinum Member
Platinum Member
Thread Starter
Deck hardware and rub rail installed can't make up my mind on bow rail or not ? the deck looks so good with out but damn its slippery finished rigging the bilge last night finally got my anodizing back so motor mounts are going in tonight and hopefully the motor. The seats are at uph. hope to have them by end of week.
#90
Platinum Member
Platinum Member
Thread Starter
installed gauges and switch panel wiring. trying too have in the water by next wed. things are really starting to come together can't wait to get it on the water. Just waiting on some last little parts then the final push to the finish.