Time to go bigger from a 588ci to a 632ci
#21
Gold Member
Gold Member
Thread Starter
Join Date: Mar 2002
Location: CT
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
JD, Dart Pro 1 Alum heads, I am not sure if there is any special name for them. Hey I spoke to a guy yesterday that had a 621ci blower motor from Beck that has 1068hp at 5900rpm he has it in a 2002 28ft daytona open bow, has 40 hrs on it so far this year and no problems. running in the 110+, hey cord this guy is putting a 2deg ext box on his daytona along with his Imco SC.
#22
Rob
I'm guessing the 345 Pro 1's for heads. It looks like BRE uses quality parts in their builds. With a 1 year warrenty I don't see how you can go wrong giving them a shot. I just don't think they will get 850hp with smaller heads, and a hydralic roller cam with a lot less lift. I would expect closer to 800hp, remember dyno headers can have a huge impact and timing can be higher for "short" dyno pulls. All that aside, it looks like a good program for the money and power.
I'm guessing the 345 Pro 1's for heads. It looks like BRE uses quality parts in their builds. With a 1 year warrenty I don't see how you can go wrong giving them a shot. I just don't think they will get 850hp with smaller heads, and a hydralic roller cam with a lot less lift. I would expect closer to 800hp, remember dyno headers can have a huge impact and timing can be higher for "short" dyno pulls. All that aside, it looks like a good program for the money and power.
#23
Platinum Member
Platinum Member
Beck Racing Engines
Didn't have time to read all these reply's.
But if nobody has already said it, Beck racing
was given a real nice review in the
August issue of PowerBoat.
Cougarman
But if nobody has already said it, Beck racing
was given a real nice review in the
August issue of PowerBoat.
Cougarman
#24
Gold Member
Gold Member
Thread Starter
Join Date: Mar 2002
Location: CT
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Jd, we can probably end this thread but even though Beck has a good warranty since I live in the east coast it will still be pain to get thing fixed if there is a problem so I am continuing my search, Its amazing most all the builders are pushing the blower thing but I found a guy in NJ Kurts Marine who is a big fan of NA and has done 100's of big inchers so we will see, I will forward if you want his component list, he didn't think a problem with 850hp. The cool deal here is if it doesn't make the HP I don't pay any money.
Thanks all for the feedback, anything on Kurts Marine out of NJ would be great.
Robb
Thanks all for the feedback, anything on Kurts Marine out of NJ would be great.
Robb
Thread
Thread Starter
Forum
Replies
Last Post
mirageman
General Boating Discussion
47
01-18-2004 12:27 PM