1987 41 Apache
#31
![Default](/forums/images/icons/icon1.gif)
Just curious here, are we talking about a really well setup race boat or a pleasure boat? I would think that changing a small percentage of overall weight on the transom would not have that big of an effect, then again, I have no experience to base this on.
14,000# boat (rough guess)
500# change in hardware (rough guess)
=3.6%
I guess that number is bigger than I thought, but still, will it upset the boat?
14,000# boat (rough guess)
500# change in hardware (rough guess)
=3.6%
I guess that number is bigger than I thought, but still, will it upset the boat?
#32
Registered
Join Date: Jul 2010
Location: Centennial, CO
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
#33
JC Performance Engines
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Shouldn't it be looked as Force(mass) x Distance. So being the drives are most furthest aft that small amount of drives can have a significant change due to the distance from the CG. I am curios how the boats where set up differently. I imagine the main difference would be fuel tank location. I wonder if there where any other levers that could be pulled..... Engine location?
How about different layups, cabin vs no cabin, ballast tanks, etc...
#34
Registered
![Default](/forums/images/icons/icon1.gif)
So how is it they have side by or stag pleasure and race hulls? And some had extra large fuel tanks and storage for ummmm.... Well anyway how are they all so awesome if there are so many different configurations
#35
Registered
![Default](/forums/images/icons/icon1.gif)
Shouldn't it be looked as Force(mass) x Distance. So being the drives are most furthest aft that small amount of drives can have a significant change due to the distance from the CG. I am curios how the boats where set up differently. I imagine the main difference would be fuel tank location. I wonder if there where any other levers that could be pulled..... Engine location?
#36
#37
Registered
![Default](/forums/images/icons/icon1.gif)
The guy that owns the Canadian boat has had it a long time and did a complete refit in 2009/2010. He spent a lot of money and hardly uses the boat. If it has 20 hours on it since the refit it would surprise me. The drives might have 50 hours on them if that. I arranged for him to buy the drives awhile back when I worked at the Black & Blue company. know he had it surveyed back in 2010 and was valued at about double what he is asking. have not seen it run in a few years but ran good before the refit which I think was a SBS and now it is staggered.
#38
#39
![Default](/forums/images/icons/icon1.gif)
Because grasshopper, on the 8th day god created the APACHE 41... and because pam anderson lost her viginity in one... twiced... to 3 different guys...
#40
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
My boat was a #4 boat has #6s on it now only thing that needs to be done is a good set up with the 6s. Ill call
that a #3 has to stay #3 and not go to a #6.
![Bsflag](/forums/images/smilies/more/bsflag.gif)
![Food Smiley 007](/forums/images/smilies/food-smiley-007.gif)