How Hard To Rebuild Zeiger Steering Ram?
#22
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
I did find this wear on the rod and the bronze bushing. What should I do? The kit will contain a new bushing. Can I polish the rod? The end cap seal looks good but I haven't removed it yet for real close inspection. This problem started at the end of the second season that it was installed. There was never an impact or anything that could have bent the rod slightly. Do I need a new rod? Maybe a whole new cylinder?
![](http://i763.photobucket.com/albums/xx275/CARLC222/DSCN4544_zpsdtwbmf9r.jpg)
![](http://i763.photobucket.com/albums/xx275/CARLC222/DSCN4544_zpsdtwbmf9r.jpg)
![](http://i763.photobucket.com/albums/xx275/CARLC222/DSCN4542_zps8tsebri0.jpg)
#24
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
I've discussed this with Paul Everett and sent him the pics. We will figure out the solution. I should have called them first I guess but I figured this would be a simple re-seal job.
#25
Registered
![Default](/forums/images/icons/icon1.gif)
![Signs069](/forums/images/smilies/signs069.gif)
#28
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
And FIXX, thanks for your help.