Doug Wright RGR 28 foot cat plug in the works
#21
Nice pics Noli! Lol.......... You guys will have to wait a while for performance #s, as the boat has to get out here to California first. The motors are still in break-in mode with the little bit of run time they got put on them in Florida. I can tell you guys that Dan is SUPER happy with the way the boat performed. Once we have data to share from the two sets of props we're starting out with, we'll be sure and post it up. The one set of props are the 5 blade Herings you see on it in the pics, the other set is the Dewald 4 blades off my 28 Skater. This boat is sure to be a runner!
#23
Registered
Thread Starter
.
Latest builds...three RGR 28's built at FatCatBoats ...also builders of boat trailers for that perfect fit...
"The camo hull is going to get a flat deck with a recessed twin passenger console", Joe said
Photo Credit: Joe P.
Latest builds...three RGR 28's built at FatCatBoats ...also builders of boat trailers for that perfect fit...
"The camo hull is going to get a flat deck with a recessed twin passenger console", Joe said
Photo Credit: Joe P.
Last edited by noli; 03-29-2017 at 03:38 PM.
#24
Registered
Anyone interested in one of the Doug Wright designed 28 hulls is welcome to call me for details. We have a group purchase of ten boats that will have special pricing and there are some slots left. The most recent buyer just pulled the trigger on a pair of 400's but most are opting for 300XS power. There is a separate deck option for a single as well.
Joe
386 527 18 four five
Joe
386 527 18 four five
#25
For those that don't scroll down to check out the Doug Wright forum, but are interested in one of these new 28s, here are pictures of the first one built. The seats were out of it in these pictures, but the boat is complete other than that.