Used Power Steering ram
#1
Charter Member #232
Charter Member
Thread Starter
Used Power Steering ram
Anyone have a used broken or beat up steering ram that I can barrow for a bit or purchase? I am looking to get measurements off it only. I can even send it back when done. Thanks
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#2
speel chekk this fokker!
Charter Member
Join Date: Feb 2001
Location: Locust Valley, New York
Posts: 5,329
Likes: 0
Received 1 Like
on
1 Post
and you know evenm if he steals it he's wickedly addicted to OSO so you'll see him hear to berate him for the ram back (j/k)
8k posts I say god damn!!!!!
8k posts I say god damn!!!!!
__________________
Pardon me, while I whip this out!
Pardon me, while I whip this out!
#3
Audiofn
I am assume you are looking for an external ram. What measurements are you looking for. Couldn't we just measure one of ours to get you the deminsions you are looking for. I am using WPM set up. Just a thought.
I am assume you are looking for an external ram. What measurements are you looking for. Couldn't we just measure one of ours to get you the deminsions you are looking for. I am using WPM set up. Just a thought.
#4
Dang Puder, I remember when you broke a thousand not too long ago.
Come to think of it, I think I'm pretty close to my first "K". It only took almost 2 years.
You'd probably only have about 800 posts if they only counted correctly spelled words.
Come to think of it, I think I'm pretty close to my first "K". It only took almost 2 years.
You'd probably only have about 800 posts if they only counted correctly spelled words.
#6
Guest
Posts: n/a
Jon:I have a new setup for
a Bravo with 2 rams (New)
from IMCO.
Im not going to install
right away.
IMCO has a lot of different Rams on their
web site, I installed a
setup on a 29 Warlock that
looks 6ft Long.
Can Loan ya 1.......
You pay shipping.
Mike J.
a Bravo with 2 rams (New)
from IMCO.
Im not going to install
right away.
IMCO has a lot of different Rams on their
web site, I installed a
setup on a 29 Warlock that
looks 6ft Long.
Can Loan ya 1.......
You pay shipping.
Mike J.
#7
Charter Member #232
Charter Member
Thread Starter
Mike that would be great. I am looking for any stroke length as adjustments to make them shorter or longer would be a snap. Just so that you know I am looking to take them apart to get construction on the inside, so if that is a porblem for you then I can keep looking. On the good side once I get the measurements wantch out we will have MUCH cheaper pistons we are hopeing. I have a buddy that is a machinist and it real slow and he is interested in making these for a bunch of us. He just wants to be bussy again and his speciallty is turning on the layth.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!