Start to Finish: Building Our 50' Skater
#1295
Registered
On a good note, the Ceramic pro coating is still working good. The water definitely beads up.
Last edited by BigSilverCat; 10-25-2017 at 11:21 PM.
#1296
Registered
I finally had it ready to run Monday morning at around 8 am so we headed to the water and no the weather was not good. It was 40 degrees and raining, but I had to be back home in Joplin that night so I could not wait till the next day. I will post more later tonight but we ran it a couple passes and had something happen to one of the engines. Not sure what happened yet. We had the low tune in the engine and it ran 103 MPH, was still gaining but we were in the little lake so did not have a lot of room.
On a good note, the Ceramic pro coating is still working good. The water definitely beads up good.
On a good note, the Ceramic pro coating is still working good. The water definitely beads up good.