Start to Finish: Building Our 50' Skater
#1632
Registered
Man after all the shjt you've gone through putting this thing together and posting it all on here I wish you nothing but good luck and sunshine when you get there.
oh and a lot of hot girls on spring break for that friend you mentioned
oh and a lot of hot girls on spring break for that friend you mentioned
#1633
Registered
unwavering commitment, right now I'm hauling the boat through a completely white out blizzard to go test at lake havasu. I'm using the phone camera to see through the snow, with my eyes I cannot see the truck infront of me.
https://youtu.be/QZlFKggL3Bk
#1638
Registered
when we un-tilted the boat and looked in the engine compartment all the engine oil had ran out of both engines and was all over the place. When they did the compound turbos the engine vent moved to a different place and it was under the oil level when its tilted. I should have noticed so that is my fault. This pic is of the engine compartment on the high side, it was not near as bad but we had already cleaned most of the other one. All the oil from the high side engine ran through the holes for air and wires to go through and was all over the low side engine.