Start to Finish: Building Our 50' Skater
#1651
Registered
![Default](/forums/images/icons/icon1.gif)
I bought a couple of go-pros so I would have video of running at havasu but forgot to turn them on when we were running, but here is video of un-tilting the boat at Lake Havasu, running up and down the channel. And Baca's girlfriend loading the boat onto the trailer. She did a pretty good job for her first time.
#1652
Registered
![Default](/forums/images/icons/icon1.gif)
sucks the port motor developed an issue.
can industrial injection do the rebuild or does it have to go to another specialized shop for that ?
how did it run up to the point the engine was hurt ?
did the compound turbos perform as expected c/w coming on plane, accelerating, etc.?
about the pistons expanding more than or faster than the block.
i'd guess you don't want the closed cooling for weight and plumbing issues because of the turbos, but is there anyway
a stock circulation pump and custom thermostat housing could be used ?
water coming in the boat would go thru the coolers, thru the thermostat (depending if open) taking what it needed to maintain block water temp.
all the rest would go straight overboard.
can industrial injection do the rebuild or does it have to go to another specialized shop for that ?
how did it run up to the point the engine was hurt ?
did the compound turbos perform as expected c/w coming on plane, accelerating, etc.?
about the pistons expanding more than or faster than the block.
i'd guess you don't want the closed cooling for weight and plumbing issues because of the turbos, but is there anyway
a stock circulation pump and custom thermostat housing could be used ?
water coming in the boat would go thru the coolers, thru the thermostat (depending if open) taking what it needed to maintain block water temp.
all the rest would go straight overboard.
Last edited by outonsafari; 03-20-2018 at 03:17 PM.
#1653
Registered
Join Date: Oct 2000
Location: Ontario,Canada
Posts: 1,376
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I haven't read all of this 170 page thread, just skimmed through it. Your plan was to circumvent the planet? You have clear valve covers and no flex or not much flex in your turbo system, just to a few things noticed. Light duty GM engines? Looks like someone has spent an awful( in more ways than one) lot of money. Good luck. Regards, Andy.
#1654
Registered
![Default](/forums/images/icons/icon1.gif)
I haven't read all of this 170 page thread, just skimmed through it. Your plan was to circumvent the planet? You have clear valve covers and no flex or not much flex in your turbo system, just to a few things noticed. Light duty GM engines? Looks like someone has spent an awful( in more ways than one) lot of money. Good luck. Regards, Andy.
#1655
Registered
![Default](/forums/images/icons/icon1.gif)
I haven't read all of this 170 page thread, just skimmed through it. Your plan was to circumvent the planet? You have clear valve covers and no flex or not much flex in your turbo system, just to a few things noticed. Light duty GM engines? Looks like someone has spent an awful( in more ways than one) lot of money. Good luck. Regards, Andy.
#1656
Registered
![Default](/forums/images/icons/icon1.gif)
I was down at my favorite welders shop today, and he was working on a couple props that made me think of you.. 64" pitch 4 blade stainless cleavers...
A little aged and a little tweaked, but pretty sure there is enough meat left that you could cut em down to fit...![Fear](/forums/images/smilies/fear.gif)
Cheers
-K
![](https://cimg8.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/2000x1124/20180320_173209_96d9b354505876fedfb7816e7c18f55938187fc8.jpg)
![](https://cimg9.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/2000x1124/20180320_172845_4e13443383bceca4e97f3bf8c34c03724cf7fd5b.jpg)
A little aged and a little tweaked, but pretty sure there is enough meat left that you could cut em down to fit...
![Fear](/forums/images/smilies/fear.gif)
Cheers
-K
![](https://cimg8.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/2000x1124/20180320_173209_96d9b354505876fedfb7816e7c18f55938187fc8.jpg)
![](https://cimg9.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/2000x1124/20180320_172845_4e13443383bceca4e97f3bf8c34c03724cf7fd5b.jpg)
![](https://cimg1.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/2000x1124/20180320_172937_e6068619d6a8453b4ee4b44e83222cfab7b83fc1.jpg)
#1658
Registered
Join Date: Oct 2000
Location: Ontario,Canada
Posts: 1,376
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I do realize the heart and soul thing. I have built a few projects myself. The owner should talk to anyone who has attempted a long distance run and adjust there thoughts accordingly. This project must be close to the million dollar mark now if not more. Once again, best regards, Andy.
#1659
Registered
![Default](/forums/images/icons/icon1.gif)
Having successfully completed the Bermuda Challenge twice (and current title holder) doesn't qualify as having some background in long distance challenges?
Last edited by speicher lane; 03-21-2018 at 07:41 PM.