Start to Finish: Building Our 50' Skater
#1822
Registered
I finally got the crossover pipe between the compounded turbos welded up and heat wrapped.
installing it tonight and going to test the boat tomorrow at Grand Lake if it quits raining.
installing it tonight and going to test the boat tomorrow at Grand Lake if it quits raining.
#1825
#1826
Registered
I need to put the thermostats back in because the engines take forever to warm up in cold water and will not build boost to get on plane. Finally got on plane and ran around for a little while. Came back in running on both. I had switched the drives to inboard rotation to see what that would do and it does not work. It started proposing at around 70 instead of 90 but the big props did lower the rpm.
#1829
Registered
Oh you got me. lol. Wasnt a bash on Tyson at all, I just find it sad he has paid alot of money and spent alot of time on something he is passionate about, and it seems like he is always cleaning up someone else's shoddy work...(welds that didnt penetrate). Really no excuse for this IMO.
What kind of fire breathing boat do you have ?
What kind of fire breathing boat do you have ?
#1830
VIP Member
VIP Member
Damnit Man---Where was my phone call lol