Got The Itch Again....
#292
Registered
Thread Starter
Replaced the orig bow hatch which had a point to the front of it which was molded into the deck with a modern, square Bomar.
Which meant I had to form in the contour for the square front of the new hatch.
One of the thousand things you don’t think of on a project like this.
Which meant I had to form in the contour for the square front of the new hatch.
One of the thousand things you don’t think of on a project like this.
Last edited by Twin O/B Sonic; 03-29-2020 at 04:27 PM.
The following users liked this post:
apache brave 28 (03-29-2020), bulletbob (04-02-2020), golfmaxgolf (12-29-2022), IGetWet (03-30-2020), larslindroth (03-29-2020)
#294
Gold Member
Gold Member
I'd almost forgotten this thread!
The finished bracket looks great, nice job sir.
RR
The finished bracket looks great, nice job sir.
RR
#299
Platinum Member
Platinum Member
Clean and neat shop you've got there too
#300
Registered
What a nice view! Impressive work as usual Gary. Carry on. Hope all is well with you and the quads David.