Got The Itch Again....
#432
Registered
Always love a built, not bought thread. Looking good running at speed!
The following 2 users liked this post by Knot 4 Me:
1983ScarabIII (03-21-2023), Twin O/B Sonic (12-28-2022)
The following 3 users liked this post by Twin O/B Sonic:
The following users liked this post:
Twin O/B Sonic (12-29-2022)
#435
Registered
Join Date: Nov 2006
Location: Newport Coast, California.
Posts: 1,026
Received 692 Likes
on
323 Posts
Greetings from 'The Left Coast' Gary. So very pleased to see you running Your stunning boat. May The Happy New Boating Year be blessed for You & Your Loved Ones. Look forward to seeing You install those port holes, sounds like a great addition.
Cheers, Lars.
Cheers, Lars.
The following 2 users liked this post by larslindroth:
rak rua (12-29-2022), Twin O/B Sonic (12-29-2022)
#436
Registered
Thread Starter
Thx Lars!
I am itching to go into the motors but at this point, I haven’t even gotten to the top of what it will run as is.
Most gratifying so far though has been how well it works as a recreational cuddy cabin and is a beast (Welterweight?) in the rough!
Sometimes when we’re tied in a marina w/the shore power hooked up, and the Bimini is up, coffee is on, bellow, and the folding bikes are parked on the dock behind the boat…, I just soak it all in w/a **** eatin grin.
After docking beside a boat w/these, they will likely be a winter upgrade.
Very cool lil boogers!
https://www.ebay.com/itm/31429048023...mis&media=COPY
I am itching to go into the motors but at this point, I haven’t even gotten to the top of what it will run as is.
Most gratifying so far though has been how well it works as a recreational cuddy cabin and is a beast (Welterweight?) in the rough!
Sometimes when we’re tied in a marina w/the shore power hooked up, and the Bimini is up, coffee is on, bellow, and the folding bikes are parked on the dock behind the boat…, I just soak it all in w/a **** eatin grin.
After docking beside a boat w/these, they will likely be a winter upgrade.
Very cool lil boogers!
https://www.ebay.com/itm/31429048023...mis&media=COPY
#437
Registered
Thread Starter
Testing and experimenting…….
I have reversed prop rotation from out to in to see how it affects handling.
Havent tested yet but will before doing bellow.
And after many beers and much starring, I’ve decided to convert the motors from 25” mids to 20” mids.
This will drop 900 lbs of motors 5”.
Bad thing is, I will lose most if not all of the around dock handling by not being able to bury the motors when coming in to dock.
Any wind at all and it swings around the motors.
An besause I couldn’t help myself…..
Already had one of the very rare Lightning gearcases and when a 2nd came up on Craig’s last weekend….., w/a hangover, no money, I did the 2 1/2 hr trip to Cinci to tag it!
They we’re never offered as LH rotation so I’ll have to roll my own like I did on my last 24 Sonic.
Best thing I did this winter was, take a break from the boat to work on the MG.
Brain was fried from working on the boat!
Now I’m rejuvenated 🤪
My MO on these projects typically is to prove my science project works, then sell it to someone else to make it pretty!
But…, I got material to finish the headliner, installed a stereo, etc…….
Think Spring!
I have reversed prop rotation from out to in to see how it affects handling.
Havent tested yet but will before doing bellow.
And after many beers and much starring, I’ve decided to convert the motors from 25” mids to 20” mids.
This will drop 900 lbs of motors 5”.
Bad thing is, I will lose most if not all of the around dock handling by not being able to bury the motors when coming in to dock.
Any wind at all and it swings around the motors.
An besause I couldn’t help myself…..
Already had one of the very rare Lightning gearcases and when a 2nd came up on Craig’s last weekend….., w/a hangover, no money, I did the 2 1/2 hr trip to Cinci to tag it!
They we’re never offered as LH rotation so I’ll have to roll my own like I did on my last 24 Sonic.
Best thing I did this winter was, take a break from the boat to work on the MG.
Brain was fried from working on the boat!
Now I’m rejuvenated 🤪
My MO on these projects typically is to prove my science project works, then sell it to someone else to make it pretty!
But…, I got material to finish the headliner, installed a stereo, etc…….
Think Spring!
Last edited by Twin O/B Sonic; 03-21-2023 at 07:08 AM.
The following 3 users liked this post by Twin O/B Sonic:
#438
VIP Member
VIP Member
Testing and experimenting…….
I have reversed prop rotation from out to in to see how it affects handling.
Havent tested yet but will before doing bellow.
And after many beers and much starring, I’ve decided to convert the motors from 25” mids to 20” mids.
This will drop 900 lbs of motors 5”.
Bad thing is, I will lose most if not all of the around dock handling by not being able to bury the motors when coming in to dock.
Any wind at all and it swings around the motors.
An besause I couldn’t help myself…..
Already had one of the very rare Lightning gearcases and when a 2nd came up on Craig’s last weekend….., w/a hangover, no money, I did the 2 1/2 hr trip to Cinci to tag it!
They we’re never offered as LH rotation so I’ll have to roll my own like I did on my last 24 Sonic.
Best thing I did this winter was, take a break from the boat to work on the MG.
Brain was fried from working on the boat!
Now I’m rejuvenated 🤪
My MO on these projects typically is to prove my science project works, then sell it to someone else to make it pretty!
But…, I got material to finish the headliner, installed a stereo, etc…….
Think Spring!
I have reversed prop rotation from out to in to see how it affects handling.
Havent tested yet but will before doing bellow.
And after many beers and much starring, I’ve decided to convert the motors from 25” mids to 20” mids.
This will drop 900 lbs of motors 5”.
Bad thing is, I will lose most if not all of the around dock handling by not being able to bury the motors when coming in to dock.
Any wind at all and it swings around the motors.
An besause I couldn’t help myself…..
Already had one of the very rare Lightning gearcases and when a 2nd came up on Craig’s last weekend….., w/a hangover, no money, I did the 2 1/2 hr trip to Cinci to tag it!
They we’re never offered as LH rotation so I’ll have to roll my own like I did on my last 24 Sonic.
Best thing I did this winter was, take a break from the boat to work on the MG.
Brain was fried from working on the boat!
Now I’m rejuvenated 🤪
My MO on these projects typically is to prove my science project works, then sell it to someone else to make it pretty!
But…, I got material to finish the headliner, installed a stereo, etc…….
Think Spring!
Not knowing anything about OBs, I'm gonna wager turning them in will make the boat erratic in turns. My logic is that, as the boat leans to the right in a RH turn, the left prop losing its bite, the right prop will dig in a bite, pulling the transom to the left, exaggerating the steer. Turning them out will have the opposite effect, the right prop trying to pull the transom to the right, loading the turn against the steer. Just my guess. News at eleven, I guess...
Thanks. Brad.
(937)545-8991
The following users liked this post:
Twin O/B Sonic (03-22-2023)
The following users liked this post:
Twin O/B Sonic (03-22-2023)
#440
Registered
Thread Starter
Do a search on the subject on here Brad.
There is tons of info but most is in theory.
Very little, real world comparison’s on same boat.
Plus all is relative to IO’s.
I tried it on my first twin OB 24’ Sonic and it didn’t like it.
But w/existing handling on this boat, it’s a free test I’m willing to try.
Cary, no argument from me brother.
I read that all Fountains came w/wheels turning in so someone made it work.
Well see.
W/my motors, it just gear cases so easy switch.
If the boat doesn’t like it w/the 25’s then I’ll switch back when converting to the 20’s.
There is tons of info but most is in theory.
Very little, real world comparison’s on same boat.
Plus all is relative to IO’s.
I tried it on my first twin OB 24’ Sonic and it didn’t like it.
But w/existing handling on this boat, it’s a free test I’m willing to try.
Cary, no argument from me brother.
I read that all Fountains came w/wheels turning in so someone made it work.
Well see.
W/my motors, it just gear cases so easy switch.
If the boat doesn’t like it w/the 25’s then I’ll switch back when converting to the 20’s.
OBSonic,
Not knowing anything about OBs, I'm gonna wager turning them in will make the boat erratic in turns. My logic is that, as the boat leans to the right in a RH turn, the left prop losing its bite, the right prop will dig in a bite, pulling the transom to the left, exaggerating the steer. Turning them out will have the opposite effect, the right prop trying to pull the transom to the right, loading the turn against the steer. Just my guess. News at eleven, I guess...
Thanks. Brad.
(937)545-8991
Not knowing anything about OBs, I'm gonna wager turning them in will make the boat erratic in turns. My logic is that, as the boat leans to the right in a RH turn, the left prop losing its bite, the right prop will dig in a bite, pulling the transom to the left, exaggerating the steer. Turning them out will have the opposite effect, the right prop trying to pull the transom to the right, loading the turn against the steer. Just my guess. News at eleven, I guess...
Thanks. Brad.
(937)545-8991