Got The Itch Again....
#54
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Ding, ding, ding.
For a car motor guy, that's pretty good 😉
Took my drawings to the local fab shop yesterday but they're not sure they can cut the half inch that I need for the motor board part.
I have all the glass and may build one myself.
For a car motor guy, that's pretty good 😉
Took my drawings to the local fab shop yesterday but they're not sure they can cut the half inch that I need for the motor board part.
I have all the glass and may build one myself.
#57
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
![](https://cimg9.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/2000x1504/img_3125_a5b1bdf66a8b1d17abfeb4d97a69fb50881d3494.jpg)
![](https://cimg0.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/2000x1504/img_3126_d6799f39e1b9068a1944136bdd5fbe8a7937718a.jpg)
Pod for the throttles came out great.
Need to clean the paint up a bit after getting it too hot.
Funny thing is, I had a 1/2 can of Rustoleum (was using as filler) in the shop that matches the boat almost perfectly.
Sometimes it pays to be a redneck.