OT - Stereo Upgrades
#53
Registered
HOLY CHIT we all agree on something !!! lets face it its not opinion its science and math we are all just trying to argue over the best way to sum up the same thing. I do enjoy debating with you guys though
#54
Registered
Join Date: Sep 2001
Location: 273.76 miles from Havasu
Posts: 594
Likes: 0
Received 0 Likes
on
0 Posts
No comment...
Originally posted by apache77
what comp. vehicle?
what comp. vehicle?
Back then, the big guys were doing 150's...we were not the big guys...
BTW, a square sine is not a DC voltage...
#59
Registered
Join Date: Sep 2001
Location: 273.76 miles from Havasu
Posts: 594
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by apache77
i will date myself,
in 91 i had 8 15" 16 batt 3 alt. 4 surfboard earthquake
i will date myself,
in 91 i had 8 15" 16 batt 3 alt. 4 surfboard earthquake
#60
Charter Member #232
Charter Member
Originally posted by jr
Audio you made a couple points on speaker placement and mounting. How much, if any, effect on sound quality is there if the back side of the speaker is mounted in an open enviroment. For example. Is there much difference if a speaker is mounted to a sheet of plywood with no box around the back of the speaker. Or if the back of the speaker is completely enclosed in a box, or behind a trim piece.
Reason I mention this is, the mounting location I currently have my speakers in is open at the bottom. They are mounted in the trim along the gunwale. Its open at the bottom. I can reach up from underneith to get to the back of the speaker.
Subs are mounted in boxes specificaly designed for their particular specs. Can and do full range speakers benifit from reflex, or ported enclosures.
I ask this because its probably good mounting advice for everyone to hear.
Audio you made a couple points on speaker placement and mounting. How much, if any, effect on sound quality is there if the back side of the speaker is mounted in an open enviroment. For example. Is there much difference if a speaker is mounted to a sheet of plywood with no box around the back of the speaker. Or if the back of the speaker is completely enclosed in a box, or behind a trim piece.
Reason I mention this is, the mounting location I currently have my speakers in is open at the bottom. They are mounted in the trim along the gunwale. Its open at the bottom. I can reach up from underneith to get to the back of the speaker.
Subs are mounted in boxes specificaly designed for their particular specs. Can and do full range speakers benifit from reflex, or ported enclosures.
I ask this because its probably good mounting advice for everyone to hear.
Jon
__________________
Put your best foot forward!
Put your best foot forward!
Last edited by Audiofn; 10-30-2002 at 09:05 PM.