Predator builds a fun V21 for outboard power
#1
Registered
Thread Starter
Predator builds a fun V21 for outboard power
.
This 21 will bring back memories for a lot of us who started with smaller outboards like this Predator V21
All vacuum-bagged, coosa transom, foam stringers, one would think this was built for racing, and some will probably enter this in OPA Racing
The gelcoat is quite extraordinaire
This 21 will bring back memories for a lot of us who started with smaller outboards like this Predator V21
All vacuum-bagged, coosa transom, foam stringers, one would think this was built for racing, and some will probably enter this in OPA Racing
The gelcoat is quite extraordinaire
#2
Registered
Thread Starter
.
#3
Registered
Thread Starter
.
Pad keel bottom
Pad keel bottom
Last edited by noli; 12-15-2018 at 12:33 PM.
#6
Registered
Thread Starter
.
The first one is not yet spoken for, but there are OPA racers that have been showing lots of interest on this build
I'll update once I get more info on the power.
but most definitely the hull can handle the 300R V8 motors.
.
.
The first one is not yet spoken for, but there are OPA racers that have been showing lots of interest on this build
I'll update once I get more info on the power.
but most definitely the hull can handle the 300R V8 motors.
.
.
#7
Offshoreonly Advertiser
Offshoreonly Advertiser
Don't they have the 21 Shadow molds?
__________________
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
#8
Registered
Thread Starter
,
Diamond,
I believe they have the Intimidator 21 molds as can be seen in the round enginewell, which will be deleted from the deck
The pic below is a red mold, the black gelcoat is on , then the red gelcoat is applied
.
Diamond,
I believe they have the Intimidator 21 molds as can be seen in the round enginewell, which will be deleted from the deck
The pic below is a red mold, the black gelcoat is on , then the red gelcoat is applied
.
#9
Registered
I like the red and black. Its appropriate, since that's Patchogue/Medford HS colors! That would be a real fun boat with a 300R! How would you compare the build to say a Tuff?
#10
Registered
Thread Starter
.
All Tuff boats and the owners and especially the workers are all top notch people. I'm looking for 3rdly owned Tuff boats because of affordability. New Tuff boats are pricey for me.
.
All Tuff boats and the owners and especially the workers are all top notch people. I'm looking for 3rdly owned Tuff boats because of affordability. New Tuff boats are pricey for me.
.