Losing a whole Verado at full speed!
The following 2 users liked this post by Jupiter Sunsation:
DiamondPerformance (05-12-2020), noli (05-12-2020)
#2
Registered
A properly designed bolted joint will have enough length between the nut and the head of the bolt to properly stretch the bolt so it doesn’t lose tension.
The larger the bolt diameter, the greater this length needs to be.
I’d be weary of a thin bracket or jack plate using huge bolts that wasn’t designed with this in mind.
The larger the bolt diameter, the greater this length needs to be.
I’d be weary of a thin bracket or jack plate using huge bolts that wasn’t designed with this in mind.
The following users liked this post:
OLDRAT (05-12-2020)
The following users liked this post:
underpsi68 (05-12-2020)
#4
Registered
Thread Starter
635 lb motor hanging by the tie bar...........how would you bring that aboard? They marked it on the GPS so they sounded like they were coming back for it.
The following users liked this post:
thisistank (05-12-2020)
#5
Registered
#6
Forum Regulator
VIP Member
Qualified Captain my ass!
Who drives full throttle like that and takes their hands off the sticks?
Then starts the other motor while it's gasping air?
Who drives full throttle like that and takes their hands off the sticks?
Then starts the other motor while it's gasping air?
The following 3 users liked this post by Sydwayz:
#8
Registered
So the seat and the engines both have a significant amount of travel underway...
The following 5 users liked this post by Knot 4 Me:
Gimme Fuel (05-13-2020), Interceptor (05-12-2020), LakeHuronPower (05-12-2020), Mentalpause (05-13-2020), speicher lane (05-12-2020)
#9
Platinum Member
Platinum Member
Reminds me of Ron Whites tire, it fell the Fk off..............
Last edited by F-2 Speedy; 05-12-2020 at 11:28 AM.
#10
Registered
Thread Starter
Love Ron White.........."I had the right to be silent, I just didn't have the abillility"
Odd commentary from the camera guy, lose a motor and "in any other boat it would have capsized?" Not sure about that one unless it was a huge OB on a jon boat with a ton of weight in the front to counterweight the oversized OB.