Classic 22 surface drive conversion
#21
Registered
Thread Starter
I don't know much about them, knew nothing before buying one.
They are really simple, most parts that I would consider consumable are just off the shelf stuff.
You will want to look for one with a drop box, ASD6 have helical cut gears that can take a max hp of somewhere around 500 I think. But straight cut gears would solve that.
The hull shape and center of mass have a huge bearing on how well it will work. On a surface drive boat you want some rocker and absolutely no hook.
Do some looking, and if you find a potential drive, ask questions about it specifically.
They are really simple, most parts that I would consider consumable are just off the shelf stuff.
You will want to look for one with a drop box, ASD6 have helical cut gears that can take a max hp of somewhere around 500 I think. But straight cut gears would solve that.
The hull shape and center of mass have a huge bearing on how well it will work. On a surface drive boat you want some rocker and absolutely no hook.
Do some looking, and if you find a potential drive, ask questions about it specifically.
#22
Registered
For all you doubters, Bjorn in Sweden had a 22 Classic that ran 112 mph without insane power and without any hull mods. A lot of people assumed he had added a pad but I talked with him and he did not! Bravo X drive. HP and prop not disclosed.
Last edited by thirdchildhood; 08-12-2020 at 06:01 PM.
The following 7 users liked this post by thirdchildhood:
BONDO10 (08-13-2020), Gimme Fuel (08-13-2020), IGetWet (08-12-2020), larslindroth (08-16-2020), OldSchool (08-15-2020), SB (08-13-2020), Smarty (08-13-2020)
#23
Registered
^^^ Wow he’s moving! Got it aired out nicely. Wonder what he had for drive and prop. Pretty sure I bought a pair of 3 blade cleavers from him.
To the OP, I can’t offer any input on the arnesons or other surface drives, but I say see how deep the rabbit hole goes!
To the OP, I can’t offer any input on the arnesons or other surface drives, but I say see how deep the rabbit hole goes!
#24
Registered
wasnt there a thread about this boat? The arneson donzi?
while looking i found this video and now of course i have to get one
The following 4 users liked this post by outonsafari:
Gimme Fuel (08-13-2020), HabanaJoe (08-12-2020), larslindroth (08-16-2020), thirdchildhood (08-12-2020)
#26
Registered
The following 2 users liked this post by thirdchildhood:
Gimme Fuel (08-13-2020), IGetWet (08-13-2020)
#27
Registered
Thread Starter
#28
Registered
#29
Registered
Thread Starter
The following users liked this post:
thirdchildhood (08-13-2020)
#30
Registered
Yes. The one I posted of Bjorn is a stock hull. The one that crashed had a pad added and the bustle. And, yes, the pressure to make a fast run and adrenaline got the best of the driver. He obviously should have backed out of it when it started rocking back and forth.
Last edited by thirdchildhood; 08-13-2020 at 01:57 PM.
The following users liked this post:
larslindroth (08-16-2020)