Recommend Roots Supercharger Carburetor Builder?
03-27-2021, 05:10 PM
#1
Rob
VIP MemberThread Starter
Recommend Roots Supercharger Carburetor Builder?
Looking to buy 2 new Blower Carburetors. Please just people with experience with Company's that builds draw thru Blower Carbs. Not really wanting just a recal standard Holley carb,
Wanting it to idle better, trying get not much surge.
400ci sbc,around 1000hp
Who do you recommend that Builds/Manufacturers 4500 series carbs.
I started out looking at APD AED
Thanks for any help
Rob
Pik old set up
.
Wanting it to idle better, trying get not much surge.
400ci sbc,around 1000hp
Who do you recommend that Builds/Manufacturers 4500 series carbs.
I started out looking at APD AED
Thanks for any help
Rob
Pik old set up
.
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
03-27-2021, 05:51 PM
#2
Registered
Looking to buy 2 new Blower Carburetors. Please just people with experience with Company's that builds draw thru Blower Carbs. Not really wanting just a recal standard Holley carb,
Wanting it to idle better, trying get not much surge.
400ci sbc,around 1000hp
Who do you recommend that Builds/Manufacturers 4500 series carbs.
I started out looking at APD AED
Thanks for any help
Rob
Pik old set up
.
Wanting it to idle better, trying get not much surge.
400ci sbc,around 1000hp
Who do you recommend that Builds/Manufacturers 4500 series carbs.
I started out looking at APD AED
Thanks for any help
Rob
Pik old set up
.
Pro Systems Muskegon Mich 727 490 5717 www.pro-system.com just got 4 they did good for me
The following users liked this post:
endeavor1 (03-27-2021)
03-27-2021, 06:17 PM
#3
Registered
Mine are N/A but our prosystems carbs and Daytona sensors ignition work so amazing I have zero desire to go efi.
Do a little research on the Daytona sensor ignition and you will be impressed.
Do a little research on the Daytona sensor ignition and you will be impressed.
The following users liked this post:
PigNaPoke (03-28-2021)
Platinum Member
The following users liked this post:
Charli (03-30-2021)
03-28-2021, 11:26 AM
#7
Registered
The following users liked this post:
offshoredrillin (03-28-2021)
Racer
03-29-2021, 08:05 AM
#9
Registered
Another one for Nickerson. Had a set of carbs that he built in the late 90s, put a blower 540 together in 2007. Called him and gave him serial numbers of the carbs, he told me what air bleeds and jets to use he was dead on.
03-29-2021, 08:34 AM
#10
Registered
Had the opposite experience with Nickerson, $1500 after his "magic" they ran like garbage.Fuel curve was junk, lot of the passages were hogged out too much etc .
Back in the day maybe you needed some guy to modify carbs because choices were limited but today with all the great choices you absolutely do not.
The idea that some guy sitting somewhere in his shop doing mail order tunes knows what your boat needs is dumb to me.
Get yourself a good set of QFT carbs and off you go . My QFT carbs I couldn`t get them to surge.
Back in the day maybe you needed some guy to modify carbs because choices were limited but today with all the great choices you absolutely do not.
The idea that some guy sitting somewhere in his shop doing mail order tunes knows what your boat needs is dumb to me.
Get yourself a good set of QFT carbs and off you go . My QFT carbs I couldn`t get them to surge.
