Trailer Under Lighting
#11
Registered
Thanks guys for taking the time to reply, that definitely gives me some ideas. I wasn’t planning to run at night bout thought it would be cool when getting back on the trailer at night, backing in the driveway at night, or doing a quick wash down at night. Yes, a lot of effort for little reward but, thought it would finish my little scout rig out nicely.
Jr
Jr
The following users liked this post:
J-Bonz (06-05-2021)
#12
VIP Member
VIP Member
I'm doing these on mine as uplighting for night and it just looks cool shining up on a white hull.
The following users liked this post:
J-Bonz (06-05-2021)
#13
VIP Member
VIP Member
I got pulled over at 0430 one morning driving the 650 to work. PoPo said the blue shining Forward was illegal. No ticket, didn't even ask for my ID.
I turned off for 5 miles then turned back on. Fuk M
I have never had an issue towing w the trailer lights on. BUT that doesn't mean it legal or not
The lights on the trailer change color w a remote.
The following users liked this post:
SabrToothSqrl (06-07-2021)
#15
I did the under hull runway lights using simple led 2 diode clearance bulbs, have 10 on each side, hooked into my lights but did add a disconnect just in case I got hassled, but never have
#16
Registered
The following 2 users liked this post by SABER28:
ICDEDPPL (06-21-2021), Tractionless (06-30-2021)
#17
Registered
Did the truck up with some lights too.
The following 3 users liked this post by ICDEDPPL:
#18
Are any of your lights wired into the turn signals? I'd like to have some amber strips come on with the running lights (on all the time) but also blink for the turn signal, but can't seem to figure out an easy way to make that work..
The following users liked this post:
ICDEDPPL (06-22-2021)
#19
Registered
I have some shorter leds on trailer midway that are turn signals
#20
Registered
Thread Starter
Join Date: Dec 2003
Location: Cleveland, OH / Pewaukee, WI
Posts: 5,903
Received 413 Likes
on
231 Posts
Buying options seam to be endless… Good god, could spend hours for a 20’ bright white segment? Any luck by others finding lengths greater than the norm 16’? Different note, thanks Dan for the input. Hope u get those motors back together…