Block identification
#13
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
See if you can see the stamping on the front left pad of the block on the machined area, the block casting date will be on the other side from the casting #
![](https://cimg7.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/306x165/block_a3d37597491851ba446145e4656c9f83b1b5ceeb.jpg)
![](https://cimg7.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/306x165/block_a3d37597491851ba446145e4656c9f83b1b5ceeb.jpg)
The following users liked this post:
PQ290Enticer (01-30-2023)
The following users liked this post:
PQ290Enticer (01-30-2023)
#16
Registered
Thread Starter
Join Date: Jan 2023
Location: St John, WA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
#18
Registered
Thread Starter
Join Date: Jan 2023
Location: St John, WA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Apparently i need x amount of post before i can add the pictures i took, i know itll help everyone help me understand what im doing.
#19
VIP Member
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
#20
Registered
![Default](/forums/images/icons/icon1.gif)
You are on post 7 so just add three more posts to this thread. Most people will just count them down. Post 8, then 9, then 10, then pics!
![Coolcowboy](/forums/images/smilies/more/coolcowboy.gif)