IMCO box on ebay
#1
Official OSO boat whore
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Thread Starter
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
#2
Forum Regulator
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
![Default](/forums/images/icons/icon1.gif)
I have IMCO single ram hydraulic steering. Any idea how much it will cost me to buy a ram that will extend me far enough to work with this? I imagine I will have to re-prop too.
#3
Charter Member
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Join Date: Oct 2000
Location: Central, Ohio USA
Posts: 1,074
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Here's a link to their rams. Don't know if they have one long enough though. Your angle would have to change too.
http://www.imcomarine.com/pages/nev-...steering%20ram
http://www.imcomarine.com/pages/nev-...steering%20ram
#4
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Nay, Sydwayz,
All you gotta do is buy an "ear" from IMCO to bolt on the side of the box (the holes positions are already dimpled on the box for it). You use your same ram.
All you gotta do is buy an "ear" from IMCO to bolt on the side of the box (the holes positions are already dimpled on the box for it). You use your same ram.
#5
Forum Regulator
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
![Default](/forums/images/icons/icon1.gif)
$950 on ebay already. Screw that. I wanted a deal.
![Big Grin](/forums/images/smilies/biggrin.gif)
![Big Grin](/forums/images/smilies/biggrin.gif)
#6
Registered
![Default](/forums/images/icons/icon1.gif)
Originally posted by Cord
Somebody should bid this thing up a bit.
http://cgi.ebay.com/ebaymotors/ws/eB...category=26456
Somebody should bid this thing up a bit.
http://cgi.ebay.com/ebaymotors/ws/eB...category=26456
![Roll Eyes (Sarcastic)](/forums/images/smilies/rolleyes.gif)
![Roll Eyes (Sarcastic)](/forums/images/smilies/rolleyes.gif)
![Wink](/forums/images/smilies/wink.gif)
#7
Forum Regulator
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
![Default](/forums/images/icons/icon1.gif)
mcollinstn,
Just for my own knowledge, I am guessing this is what you are referring to, correct?
Just for my own knowledge, I am guessing this is what you are referring to, correct?
#8
Official OSO boat whore
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Thread Starter
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Yep, those are the arms. You drill and tap the box and then bolt them on. If you go with them, contact me and I'll give you a couple of pointers. They're not very expensive, less than 2 bills each. The nice thing is that they keep the centerline of the ram on the center of the gimble so your steering wont bind. These are also the same arms you would use on a Stellings box.