Florida Vacation/Ft. Myers and Nor-tech
#11
Registered
Thread Starter
Join Date: Oct 2001
Location: Madison, WI
Posts: 1,153
Likes: 0
Received 0 Likes
on
0 Posts
MORE POWER! Yes that's right folks...I believe there was an article in one of the powerboating magazines about this boat....4-Sterlings paired to #6 dry sumps in a 50' cat....they are hoping for 200MPH! Now that's some serious hardware!
#16
Registered
Wow Dave!
Thanks for the compliments and great shots. It was a pleasure having you and meeting your family. You're always welcome at Nor-Tech.
That goes for anyone that would like to stop by.
Terry
Thanks for the compliments and great shots. It was a pleasure having you and meeting your family. You're always welcome at Nor-Tech.
That goes for anyone that would like to stop by.
Terry
#18
Charter Member #232
Charter Member
I had asked a few builders that I know about the leaving the boat in the mold for a long time. The answers that I got were interesting. Most said it made zero difference, and explained to me why some manufacturers do so (this included a guy that does leave them in the mold for a average of one - one and a half months.
Anyhow their shop is just plain amazingly clean for a builder and that no doubt says a lot about their attitude towards thier boats and customers.
Jon
Anyhow their shop is just plain amazingly clean for a builder and that no doubt says a lot about their attitude towards thier boats and customers.
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#19
Registered
Join Date: Feb 2002
Location: Key West, Florida
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Dave1972
Thanks for the Pics, everytime I go up there to check out the progress of my new 36 I take my camera but never seem to get any good shots.
This company really seems to have there act together. I has been a pleasure to work with them while having the new boat built.
Did you visit the new engine shop? Holly crap!!! That place is spotless.
Thanks for the Pics, everytime I go up there to check out the progress of my new 36 I take my camera but never seem to get any good shots.
This company really seems to have there act together. I has been a pleasure to work with them while having the new boat built.
Did you visit the new engine shop? Holly crap!!! That place is spotless.
#20
Registered
time in mold
you do the math if they leave there 36 in the mold for two mouthes that means they could only build 6 boats ayear unless they have more than one mold so 20 boats a year wuold need at least 3 molds i dont think they have that many molds they tell you what you want you want to hear i heard the same story when i bought my boat good luck with the new 36