egg beater values???
#1
speel chekk this fokker!
Charter Member
Thread Starter
Join Date: Feb 2001
Location: Locust Valley, New York
Posts: 5,329
Likes: 0
Received 0 Likes
on
0 Posts
egg beater values???
how much are a pair of freshly rebiult late 80s v8 300hp evinrude outboards worth?
__________________
Pardon me, while I whip this out!
Pardon me, while I whip this out!
#2
Registered
Join Date: Mar 2001
Location: Rosedale,MD
Posts: 891
Likes: 0
Received 0 Likes
on
0 Posts
Not Much since they had some Problems, mainly in the casting from the factory in the powerhead.
They may have some good parts now.
Just what I heard.
But I do see some still running HARD.
They may have some good parts now.
Just what I heard.
But I do see some still running HARD.
#5
Charter Member
Charter Member
I'll give you 100 bucks for them Each
I bought 2 GT300's for about 2600, they have Mayfair plates on them and open exhaust and are all stock. They can be made to run very well but had some lean out problems and are hard on lowers so you need to modify them a little and ease off the drives a little.
I bought 2 GT300's for about 2600, they have Mayfair plates on them and open exhaust and are all stock. They can be made to run very well but had some lean out problems and are hard on lowers so you need to modify them a little and ease off the drives a little.
#6
coolrunning racing
VIP Member
they are not worth much. you might be able to find a good home for them. most of the bad thing in the powerhead failures were improper fuel systems in the boats not the powerheads. i have a crap load,plus the two ryan didn't buy the customer just gave them to me. fyi
#7
Registered
Join Date: Oct 2000
Location: Niskayuna, NY
Posts: 5,548
Likes: 0
Received 0 Likes
on
0 Posts
Although Ihave not had any experience with them, I have not heard anything good about them. It is also my understanding that their weight is excessive for the power they make.