O/T Direct TV question
#1
Registered
Thread Starter
Join Date: Mar 2002
Location: Brandon, MS.
Posts: 1,135
Likes: 0
Received 0 Likes
on
0 Posts
O/T Direct TV question
Got Direct TV installed last week and have a question about it for those that have/or have had it. I've noticed that I have to turn my TV volume a lot louder then I did with just regular cable. I was thinking that there was a volume adjustment on the Direct TV box but I haven't found it. It's buggin the heck out of me and I can't figure it out.
#2
Charter Member #232
Charter Member
depends on what unit you have but most do not have variable outputs. You will just have to deal with it, or try another sat box that may have a hotter output.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#4
I agree, I think the box they gave you isn't good. I had a similar problem with a car stereo when I switched between FM and a CD. The CD blasted at almost twice the volume the radio would. Come to find out it had an access port on top of the radio to the circut board and you could adjust a little pot on the board. My guess is that you should try to get a new box from the manufacturer if you can.
Or... Have Audiofn look at it.
Or... Have Audiofn look at it.
#8
VIP Member
VIP Member
........Me too, too !!!
#9
Registered
Join Date: Jan 2002
Location: Cincinnati, Oh
Posts: 1,145
Likes: 0
Received 0 Likes
on
0 Posts
Assuming that this will not be use illegally. I would not
1) subscribe to a forum such as dsstech.com
2) purchase a card reader/writer
3) download software from the forum
4) load software to card.
You will need an HU card not the new P4. I don't think there is a hack for the P4 yet. This is not rocket science - you just have to read and figure out how this is done.
1) subscribe to a forum such as dsstech.com
2) purchase a card reader/writer
3) download software from the forum
4) load software to card.
You will need an HU card not the new P4. I don't think there is a hack for the P4 yet. This is not rocket science - you just have to read and figure out how this is done.