aftermarket exhaust manifolds [price]
#11
Registered
Join Date: May 2002
Location: Rochester, NY
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
Tim G. did you notice any gains in the mid-range? How clean was the installation with the stainless marine manifolds? Any adverse effects with the CPU's? I have 502 EFI's also, and have considered going to the stainless marine manifolds, but hate to spend $'s with no effect other than saving weight.
#12
Charter Member #655
Charter Member
you can get EMi manifold from Steve Snider here on the board for $1100 per set with cast risers the stainless are like $300 more....
__________________
If your boat has a sail do you ride a horse to the ramp?
If your boat has a sail do you ride a horse to the ramp?
#13
Registered
Join Date: Oct 2000
Location: Fells Point MD
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
I have two pairs of Merc/Gil exhausts off of HP500s. They have about 50 hours and were pulled when the previous owner put Stellings headers on the 30 Spectre.
Asking $2,500 plus shipping from NJ..
Also have the stock tail pipes available.
thanks
Shawn
Asking $2,500 plus shipping from NJ..
Also have the stock tail pipes available.
thanks
Shawn
#14
(aka) Pure Adrenaline
Platinum Member
I had to replace the Harden exhaust manifolds on my Cigarette. I went with Stainless Marine and am very satisfied with there work. They shipped us the manifolds and I installed them, then had to take the dimensions off the manifolds to the holes already in the transom. I am running TRS so I had a long way to go. They are 4" double wall dry tubes and the water dumps in about 1 1/2" from the end. They came in perfect and with no mufflers sound awesome.
#15
Charter Member
Charter Member
Join Date: Oct 2000
Location: SoCal
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
Will the EMI's work with Capt's call? How will they hold up with occasional salt water and regular flushing?
__________________
Baja History
2000 29 Outlaw 2x454 mags (sold)
2000 25 Outlaw 502 (moved up to 29 OL)
1998 232 Islander 7.4 (got the 25 OL)
Tow Rig
04 Excursion EB PSD 4x4 6" lift 35's
MY PICS: http://community.webshots.com/user/skygod73
Baja History
2000 29 Outlaw 2x454 mags (sold)
2000 25 Outlaw 502 (moved up to 29 OL)
1998 232 Islander 7.4 (got the 25 OL)
Tow Rig
04 Excursion EB PSD 4x4 6" lift 35's
MY PICS: http://community.webshots.com/user/skygod73
#17
Registered
Thread Starter
Join Date: Apr 2001
Location: beaumont tx
Posts: 1,703
Likes: 0
Received 0 Likes
on
0 Posts
wow, getting a few replies here, I will try to call some of you guys on tuesday, anyone else? Hey Carl I think they make some EMI's that will work with Cap Call, i don't know if the ones here will fit are not??
#18
H2Xmark... I am extremely pleased with my Revolution Marine Inc. exhaust. I am currently using them on my race boat and I will stand behind their product. Here are some of the benefits of Revolution Marine performance exhaust.
1)Cast in dam to prevent water reversion....this allows for more cam overlap
2)Water transfer hose eliminates severe engine damage caused by water leaks in riser gaskets(this is where MOST exhaust systems leak...Revolution Marine has solved that issue). This system ensures against hydro-lock
3)Hard anodized water jackets for salt water protection
4)Race proven/Poker run proven
These are just some of the HUGE benefits of Revolution Marine Inc exhaust systems..
P.S.- All of this for about $800.00-950.00..... you can't beat that!!!!
Any questions you can e-mail me at [email protected] or goto www.revolutionmarine.com
1)Cast in dam to prevent water reversion....this allows for more cam overlap
2)Water transfer hose eliminates severe engine damage caused by water leaks in riser gaskets(this is where MOST exhaust systems leak...Revolution Marine has solved that issue). This system ensures against hydro-lock
3)Hard anodized water jackets for salt water protection
4)Race proven/Poker run proven
These are just some of the HUGE benefits of Revolution Marine Inc exhaust systems..
P.S.- All of this for about $800.00-950.00..... you can't beat that!!!!
Any questions you can e-mail me at [email protected] or goto www.revolutionmarine.com
Last edited by Qball; 11-17-2003 at 07:34 PM.