Mirage boat owners club
#11
Registered
Join Date: Oct 2005
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Re: Mirage boat owners club
The 217 Seems Hard To Find Pics Or Info On I Just Bought One And I Would Like To Find Parts Or Anything To Do With This Boat,WHAT SHOULD THE TOP SPEED BE ON A STOCK 217 WITH A 454 BE.MINE HAS THE 2 CAPTAINS CHAIRS,WERE MANY MADE LIKE THIS.WHAT WAS THE NORMAL CONFIGURATION.IS THERE ANY SHOPS IN WASHINGTON THAT STILL DEAL WITH ANY MIRAGE PARTS.?THANX.
#13
Platinum Member
Platinum Member
Join Date: Jun 2001
Location: Silverdale,Washington,USA
Posts: 602
Received 0 Likes
on
0 Posts
Re: Mirage boat owners club
Brad Wilson "Thunderballs" on nwoffshore.com has a lot of information about Mirage's and connections to get parts.
Caleb
Caleb
#14
Registered
Re: Mirage boat owners club
Hey guys....i worked for a former mirage dealer in Wisconsin for about 3 years. many of our customers had these boats and from working on them and around them i found them to very well built boats. I am most familiar with the 232 and the 257. we did some big motors for a few 257s and they handle the power well. There is one running out of LaCrosse WI that does close to 90mph. im going to get a membership so i can maybe post some pics. Also i know of a 30' mirage, i know they didnt make many of them...i believe the modle was 312?? i could be wrong. - andrew
#15
Registered
Join Date: Oct 2005
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Re: Mirage boat owners club
Thanx,im Goin From Seattle To Sacremento This Weekend To Pick Up Mint Red 217 W/454/bravo 1.they Are Called Intruders Right?which Co Made Those And Where They From.thanx.
#16
Registered
Join Date: Nov 2007
Location: Seattle WA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Yep, the 217 was called the "Intruder", from Mirage Manufacturing in the Seattle area. Mirage changed hands a few times and the location changed but I believe they were a little north of Seattle.
#20
Registered
Join Date: Nov 2011
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Just bought the same boat from nephew
Hello,
I just bought the same boat from my nephew. He just put a GM V-8 Indmar engine (454) and it seems to run fine but he has no info on the boat at all. It looks to be in the same condition as yours except some of the instruments are not operating on the control panel. Can you direct me where to purchase owners manual / wiring diagrams? I have contacted Mirage twice at their website but have no response as of yet.
Thanks for any help or insights you can give and good luck with yours.
Joe
I just bought the same boat from my nephew. He just put a GM V-8 Indmar engine (454) and it seems to run fine but he has no info on the boat at all. It looks to be in the same condition as yours except some of the instruments are not operating on the control panel. Can you direct me where to purchase owners manual / wiring diagrams? I have contacted Mirage twice at their website but have no response as of yet.
Thanks for any help or insights you can give and good luck with yours.
Joe