Pulling engines this winter
#1
Registered
Thread Starter
Pulling engines this winter
I'm having my marina pull the engines this winter to replace corroded Y-Pipes (not sure how long my JB Weld is gunna hold ). What other things should I do while they are out. Here is a list of things I was thinking about. Any other recommendations?
1999 454 Mag MPI's
1995 Bravo I's
- replace impellers
- clean engine compartment
- replace spark plugs, wires, rotor
Thanks
1999 454 Mag MPI's
1995 Bravo I's
- replace impellers
- clean engine compartment
- replace spark plugs, wires, rotor
Thanks
#2
Hoses, belts, circulating pumps, paint the engines to match the color scheem of the boat, set of headers, prochargers, computer reprogramed, send the bravo to teague to be upgraded for the extra power, send the props off to be worked and labed, just a few ideas.
#4
Registered
Re: Pulling engines this winter
I'm pulling my crank this winter, I'ts too damn cold to work on the boat.
seriously though,you may want to go through all your wiring and check for corosion on contacts while you have lots of room to get around in there.
seriously though,you may want to go through all your wiring and check for corosion on contacts while you have lots of room to get around in there.
Last edited by JUST ONCE; 12-12-2003 at 12:37 PM.
#5
Charter Member #737
Charter Member
I second the coupler.
#7
Registered
Join Date: Nov 2003
Location: Lanoka Harbor, NJ
Posts: 3,354
Likes: 0
Received 0 Likes
on
0 Posts
LM,
Viginia boating .. salt water? Check the oil pans. I had to pull mine to replace, but it was @10 years old .... starters can be a pain too ... just food for thought. Have fun!
I'd like to pull mine and clean/paint bilge, rewire, remount trim pumps, etc etc "Soon babe, soon .. I'll be finished real soon, honey ... Only couple dollars more sweety" LOL
Viginia boating .. salt water? Check the oil pans. I had to pull mine to replace, but it was @10 years old .... starters can be a pain too ... just food for thought. Have fun!
I'd like to pull mine and clean/paint bilge, rewire, remount trim pumps, etc etc "Soon babe, soon .. I'll be finished real soon, honey ... Only couple dollars more sweety" LOL
Last edited by njgr8ful; 12-13-2003 at 04:05 PM.