My 22 Pachanga
#1
Registered
Thread Starter
My 22 Pachanga
left today. I'm getting the Bravo drive swap done.
I feel like a mother hen. I look out the window at the dock and my boat's gone.
Good lookin beatch ain't it? Amazing how clean your hull stays when you have a boat lift.
I feel like a mother hen. I look out the window at the dock and my boat's gone.
Good lookin beatch ain't it? Amazing how clean your hull stays when you have a boat lift.
#2
Gone Fishin'
Charter Member
Join Date: Nov 2000
Location: Grand Rapids/Holland/Grand Haven
Posts: 7,408
Likes: 0
Received 0 Likes
on
0 Posts
Where's the rest of it?
Ouch, that had to hurt!!!
Ouch, that had to hurt!!!
__________________
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
#4
Gone Fishin'
Charter Member
Join Date: Nov 2000
Location: Grand Rapids/Holland/Grand Haven
Posts: 7,408
Likes: 0
Received 0 Likes
on
0 Posts
Hey, you said it, I didn't....
Just razzin ya. There are several of those around here.... and those guys run them hard!
Just razzin ya. There are several of those around here.... and those guys run them hard!
__________________
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
#5
Registered
Thread Starter
I found out today that the AlphaSS drive is geared 1.32:1. The Bravo is 1.5. So I guess that'll slow me down some. Then again I never revved over 4800 with that SS. So maybe it'll rev higher with the Bravo, like 5000. Also wanna get rid of the 4 blade 21 pitch for a 3 blade.
Foul---Yeah, I had to DRIVE my boat to the ramp today. Cranked right up. Hauled ass doing it, too.
Foul---Yeah, I had to DRIVE my boat to the ramp today. Cranked right up. Hauled ass doing it, too.
#6
Gone Fishin'
Charter Member
Join Date: Nov 2000
Location: Grand Rapids/Holland/Grand Haven
Posts: 7,408
Likes: 0
Received 0 Likes
on
0 Posts
You can get a Bravo with a 1.36:1 ratio.... might be worth looking into. BUT, a Bravo requires a little more power to spin than an alpha. And they have a larger drag coeficient simply because they are bigger. I did the alpha to bravo swap about 8 years ago or so. Lost about 1-2 mph on the top end. Then again, my boat weighs quite a bit more than yours....
Also, look at raising your x-dimension while you have it all apart. With the higher x, you will have less drag and require less trim to get WOT. I raised my x about 5 years ago and gained about 3-4 mph (I'm guessing at this because I upped my hp at the same time for a total of about 8 mph gain). With the higher x, you will find the 4 blade will handle better and grip better when you turn.
Just some thoughts.
Also, look at raising your x-dimension while you have it all apart. With the higher x, you will have less drag and require less trim to get WOT. I raised my x about 5 years ago and gained about 3-4 mph (I'm guessing at this because I upped my hp at the same time for a total of about 8 mph gain). With the higher x, you will find the 4 blade will handle better and grip better when you turn.
Just some thoughts.
__________________
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
#7
Ginger or Mary Ann?
Charter Member
My '87 P22.(1 peice windshield) I take it yours is newer? Great Boats. Little did I know that it was just the beginning of my sickness.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Last edited by US1 Fountain; 12-02-2011 at 11:17 AM.
#8
Registered
Thread Starter
Gary the boat dude said the 1.36s were like 1600 buck...?
Also I traded the guy a Dart intake for an alum. oval port intake(the Dart is rect.) and he's going to chunk the not working silent choice trash for stainless 4" bent tube. With an 830 4150 Holley I oughta recover the hp loss of the Bravo I hope.
Also I traded the guy a Dart intake for an alum. oval port intake(the Dart is rect.) and he's going to chunk the not working silent choice trash for stainless 4" bent tube. With an 830 4150 Holley I oughta recover the hp loss of the Bravo I hope.
#10
Registered
Join Date: May 2001
Location: Minnesota
Posts: 1,485
Likes: 0
Received 0 Likes
on
0 Posts
I've always liked those 22 pachangas. Just something about them really apealls to me. The cockpits look comfy and quite roomy. How big are the cuddy's? Are they 22' including the swim platform?
Good luck on your upgrades.
Brian
Good luck on your upgrades.
Brian