TRS drives - parts?
#1
Registered
Thread Starter
TRS drives - parts?
Well, my star board TRS drive is toast. The marina hasn't taken it apart but it stopped working in forward and it has a bunch of metal shavings in it.
So, what to do now? Do I look for a new (rebuilt??) TRS drive or try to get someone to rebuild mine? The guys at the Marina aren't real confident about it since it's so old. They say they can't get parts, etc. etc.
I heard there was someone in Florida with a bunch of TRS drives and parts. Anyone know of him?
Any suggestions??? (Switching to Bravos isn't an option).
So, what to do now? Do I look for a new (rebuilt??) TRS drive or try to get someone to rebuild mine? The guys at the Marina aren't real confident about it since it's so old. They say they can't get parts, etc. etc.
I heard there was someone in Florida with a bunch of TRS drives and parts. Anyone know of him?
Any suggestions??? (Switching to Bravos isn't an option).
Last edited by bford1; 03-15-2004 at 10:01 AM.
#2
Charter Member #232
Charter Member
bford TRS stuff is easy to find still. You should have no problem getting yours fixed or replaced. I will try and get in touch with some guys in this area and see if I can find ya one. I do not remember is this a left or right hand rotation?
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#4
Charter Member #232
Charter Member
Look on the end of the prop shaft. See if it has a L or a R stamped on it. If it has a L it is a left. If it has a R or no stamp it is a Right.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#5
#6
Registered
Thread Starter
Lower Only???
Guys - thanks again for your support. Here's the latest.
I just got off the phone with the marina, South Austin Marine (SAM),. First it is a right hand rotation drive. Secondly they said that the upper seems fine. I either need to rebuild the lower or find just a lower.
Any ideas guys?
I just got off the phone with the marina, South Austin Marine (SAM),. First it is a right hand rotation drive. Secondly they said that the upper seems fine. I either need to rebuild the lower or find just a lower.
Any ideas guys?
#8
Charter Member #232
Charter Member
If it is the lower and it is just the gears you can still get them all and the bearings and they are reasonable. If you get the new ones I understand they they Cryofreeze them now....???? Not sure if that is true or not but just info I have been told. Have some one rebuild the lower. Your uper I would still take apart however just to make sure that parts from the lower did not go up there.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!