Boat Builders
#13
Charter Member #232
Charter Member
Thread Starter
Thanks MR B
Puder yes Vinnylester does stink for sure!!! However it has a lot of benifiets over polyester and cure time and workability is a LOT better then Epoxy IMO.
Jon
Puder yes Vinnylester does stink for sure!!! However it has a lot of benifiets over polyester and cure time and workability is a LOT better then Epoxy IMO.
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#14
Neno the mind boggler
VIP Member
hey Jon have you you might try some of the low viscosity epoxies from U.S composites. its a bit more cost effective than West System also. heres a link.
US composites epoxy page
you can also get it in slow, medium, and fast cures. i have had great luck with products from these guys.
US composites epoxy page
you can also get it in slow, medium, and fast cures. i have had great luck with products from these guys.
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Last edited by glassdave; 03-16-2004 at 09:53 PM.
#15
Charter Member #232
Charter Member
Thread Starter
Thanks Glass. I know the west is expensive but it was all I could get on a Sunday.
__________________
Put your best foot forward!
Put your best foot forward!
Thread
Thread Starter
Forum
Replies
Last Post
Audiofn
General Boating Discussion
13
01-03-2004 03:05 PM
Wally
General Boating Discussion
10
08-27-2003 12:38 PM