Test Run #2 seawater pump locked up!
#22
Ginger or Mary Ann?
Charter Member
The vanes will flip to the correct direction in less than 1/2 of the 1st rotation.
Stupid question. but was the belt tight? If it was loose, the seawater pump has the most resistance that it may not turn.
Stupid question. but was the belt tight? If it was loose, the seawater pump has the most resistance that it may not turn.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
#25
Registered
Thread Starter
Join Date: Sep 2003
Location: KY Lake
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by mama tryed
Ain't Boating Fun????
Ain't Boating Fun????
And about the belt...it had about a 1/2" of play in it, and I couldn't rotate anything else before I took it off.
#27
Registered
Roll with it ,
300 hours ???
I change my impellers every spring (at least)
cheap insurance from damaging an engine with over heating
Man get to the boat and change the impellers
NOW
300 hours ???
I change my impellers every spring (at least)
cheap insurance from damaging an engine with over heating
Man get to the boat and change the impellers
NOW
#28
Originally posted by Boatme
Roll with it ,
300 hours ???
I change my impellers every spring (at least)
cheap insurance from damaging an engine with over heating
Man get to the boat and change the impellers
NOW
Roll with it ,
300 hours ???
I change my impellers every spring (at least)
cheap insurance from damaging an engine with over heating
Man get to the boat and change the impellers
NOW
#30
Registered
Thread Starter
Join Date: Sep 2003
Location: KY Lake
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by marinetrans
Try putting back together, like US1 said, could also be a lose belt or oil on the belt/pulleys. Clean the belt and all the pulleys before putting back together.
Try putting back together, like US1 said, could also be a lose belt or oil on the belt/pulleys. Clean the belt and all the pulleys before putting back together.
I haven't had a good history with components that just seem to correct themselves. The belt was tight and there wasn’t any oil on the pulleys, just debris from the belt.
Thanks for all the info and help...