Tools
#52
VIP Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Originally posted by HyperBaja
It has worked fine for us. Not running a flat rate shop, just replacing things on our cars. Air ratchet, impact and die grinder. Yes, the die grinder will out run the pump after a few minutes, but not enough to justify another 3-400+$.
It has worked fine for us. Not running a flat rate shop, just replacing things on our cars. Air ratchet, impact and die grinder. Yes, the die grinder will out run the pump after a few minutes, but not enough to justify another 3-400+$.
A 79 dollar compressor WILL not run a impact 15 gal tank runs out in a few seconds with a impact like mabye 2 secs, takes like 1/2 hour to remove 20 lug nuts
![Big Grin](/forums/images/smilies/biggrin.gif)
![Big Grin](/forums/images/smilies/biggrin.gif)
![Big Grin](/forums/images/smilies/biggrin.gif)
BTW a flat rate shop uses a 7.5hp or 10hp and they are not 300-400,, More like 1000-1500
Last edited by wwwTOPDJcom; 05-07-2004 at 08:33 AM.
#53
Registered
Join Date: Feb 2001
Location: Cedar Rapids, IA, US
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Craftsman for everyday banging around. Facom for the nice stuff. You really can tell a difference, altho I will never take a hammer to my Facom stuff, but I wouldn't even flinch taking it to my Craftsman tools and beating the hell out of them.
Ingersoll-Rand for a compressor, don't EVER cheap out on the compressor, you'll just be mad...... No matter what every manufacture claims, you need massive continuous-duty real life claims. My Ingersoll is only rated 5 hp, but if you use the same rating all the 'other' manufactures do, it comes out to 21.4hp....
Ingersoll-Rand for a compressor, don't EVER cheap out on the compressor, you'll just be mad...... No matter what every manufacture claims, you need massive continuous-duty real life claims. My Ingersoll is only rated 5 hp, but if you use the same rating all the 'other' manufactures do, it comes out to 21.4hp....
![crazy](/forums/images/smilies/gurn.gif)
#54
Registered
Join Date: Jan 2001
Location: ST. Louis, MO, USA
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Cheap tools have their place. I keep a cheap set on the boat (see earlier post re: expensive tools sink faster). Just dont use a cheap tool where it will do more damage to the job than to itself. Good exaple, dont use a $2 line/flair wrench to remove a $40 brake line on my '68 vette. Learned that the hard way.
As for compressors, I just dont expect my 4 gal to work as well as my 60 gal. No harm done, it just takes A LOT longer.
Gary
As for compressors, I just dont expect my 4 gal to work as well as my 60 gal. No harm done, it just takes A LOT longer.
Gary