MSD Box brackets
#1
Rob
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
On my Hustlers 500 efi motors I made these brackets my self for the marine MSD box .You can to. I made them out of aluminum and put the riv nuts in it . It bolts to the bracket behind the motor where the ecm is ,fuel pump relays are .
The harness was a good bit long .I just wire tied it under the L part of the bracket out of site.The worse part was hooking up the hot wire
The boxes did clean up the Idle .Transom is clean now . Maybe I can richen the motors back up.
The harness was a good bit long .I just wire tied it under the L part of the bracket out of site.The worse part was hooking up the hot wire
![Frown](/forums/images/smilies/frown.gif)
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.