WTB:Large U- Bolts where to buy?
#1
Charter Member
Charter Member
Thread Starter
Join Date: Oct 2000
Location: Lake Orion, MI. USA
Posts: 1,560
Likes: 0
Received 0 Likes
on
0 Posts
WTB:Large U- Bolts where to buy?
I nee some very large U-Bolts (Actually square) 4" x 20" These are needed to bolt my Myco Boat lift cradle to my 4 post boat lift. I have a 8" x 3.75 tube setting on top of a 6" x 10" I beam and need to clamp them together.
I could use some bolts and plates but a U-Bolt would be better. Any sources?
Thanks
I could use some bolts and plates but a U-Bolt would be better. Any sources?
Thanks
__________________
Ray
Ray
#3
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: WTB:Large U- Bolts where to buy?
Ray, that is a trailer or truck type item, maybe.
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
#4
Registered
Join Date: Nov 2000
Location: Grand Haven, MI USA
Posts: 3,124
Likes: 0
Received 0 Likes
on
0 Posts
Re: WTB:Large U- Bolts where to buy?
A good spring and axle shop will custom bend them for you. Square or round. I paid $10 a piece at Grand Rapids Spring & Align.
#5
Registered
#6
Re: WTB:Large U- Bolts where to buy?
Originally Posted by MitchStellin
A good spring and axle shop will custom bend them for you. Square or round. I paid $10 a piece at Grand Rapids Spring & Align.
What Mitch said I had some made for my trailer in BFE Louisiane a little smaller but he did them in less then the time it took me to use the restroom and 3 were less then $20 after tax. Call spring shops. Rag's
#8
Charter Member
Charter Member
Thread Starter
Join Date: Oct 2000
Location: Lake Orion, MI. USA
Posts: 1,560
Likes: 0
Received 0 Likes
on
0 Posts
Re: WTB:Large U- Bolts where to buy?
I found a local spring shop to make them. They ended up being 3/4" dia 4" spread and a 20" leg. They were about 12.00 each. Now I need to get some 2" angle to make the bracket that they will clamp with. Thanks for the suggestions!
__________________
Ray
Ray
Thread
Thread Starter
Forum
Replies
Last Post
emoore924
Classic Offshore
9
04-09-2007 06:09 PM
THRILLSEEKER
General Boating Discussion
6
11-11-2002 04:34 PM