updating power
#1
Charter Member#203
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Thread Starter
Join Date: Oct 2000
Location: Ft.Myers, Fl/ Atlanta, Ga/ Worldwide
Posts: 19,716
Received 15,684 Likes
on
4,069 Posts
![Default](/forums/images/icons/icon1.gif)
here are some photo's of a repower job on a 42 fountain with number 5's.
The first pic , the motors have been in and out, new mounts made, and engine compartment will be cleaned and painted with white imron.
The first pic , the motors have been in and out, new mounts made, and engine compartment will be cleaned and painted with white imron.
#2
Charter Member#203
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Thread Starter
Join Date: Oct 2000
Location: Ft.Myers, Fl/ Atlanta, Ga/ Worldwide
Posts: 19,716
Received 15,684 Likes
on
4,069 Posts
![Default](/forums/images/icons/icon1.gif)
after paint , thru hulls and strainers installed.
Last edited by Pete B; 06-12-2004 at 10:43 AM. Reason: sp
#3
Charter Member#203
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Thread Starter
Join Date: Oct 2000
Location: Ft.Myers, Fl/ Atlanta, Ga/ Worldwide
Posts: 19,716
Received 15,684 Likes
on
4,069 Posts
![Default](/forums/images/icons/icon1.gif)
then comes the fun part, time for the motors , and the project really takes shape
#4
Charter Member#203
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Thread Starter
Join Date: Oct 2000
Location: Ft.Myers, Fl/ Atlanta, Ga/ Worldwide
Posts: 19,716
Received 15,684 Likes
on
4,069 Posts
![Default](/forums/images/icons/icon1.gif)
with alignment good time for the drives.
#5
Charter Member#203
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Thread Starter
Join Date: Oct 2000
Location: Ft.Myers, Fl/ Atlanta, Ga/ Worldwide
Posts: 19,716
Received 15,684 Likes
on
4,069 Posts
![Default](/forums/images/icons/icon1.gif)
more pics added later also added to drives imco wing plates, and tie bar.
Last edited by Pete B; 06-12-2004 at 10:47 AM.
#6
Charter Member#203
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Thread Starter
Join Date: Oct 2000
Location: Ft.Myers, Fl/ Atlanta, Ga/ Worldwide
Posts: 19,716
Received 15,684 Likes
on
4,069 Posts
![Default](/forums/images/icons/icon1.gif)
all work was done a Page Racing, in Ft, Myers Florida.
#7
Charter Member#203
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Thread Starter
Join Date: Oct 2000
Location: Ft.Myers, Fl/ Atlanta, Ga/ Worldwide
Posts: 19,716
Received 15,684 Likes
on
4,069 Posts
![Default](/forums/images/icons/icon1.gif)
Engines are Innovation 900's !
#9
Registered
![Default](/forums/images/icons/icon1.gif)
Originally Posted by Pete B
more pics added later also added to drives imco wing plates, and tie bar.
Is it a stepped boat?
If so, how far down below the bottom do you put your water pick ups to get in good water?
How much speed will they scrub off in your estimation?
Thanks