Project Complete... Painting my Checkmate
#1
Registered
Thread Starter
Project Complete... Painting my Checkmate
I actually finished it May 29 and splashed it that afternoon. What a totally different boat with color and shine. I kinda liked the factory color scheme and decided to keep it the same. Also, if there is ever an accidental chip in the paint, it will be hard to see because it is the same color underneath. I did all the work myself except the final sanding of the fiberglass repairs on the transom, and the spraying of the paint. There is a lot of self satisfaction looking at a finished project that you did most of yourself. Hard work does pay off.....
Pics 1,2, and 3
The boat was clear coated by one of the previous owners. The clear was peeling on the white and black gel coat and had turned a cloudy white on the yellow. You can see in pic 2 where I had started sanding the clear off. It also had exhaust holes that were cut out by the last owner for his monster power, and holes from 2 f-ugly plastic bayliner looking swim platforms. All of which had to be filled. I plan on a Extreme Marine platform in the future.
Pics 1,2, and 3
The boat was clear coated by one of the previous owners. The clear was peeling on the white and black gel coat and had turned a cloudy white on the yellow. You can see in pic 2 where I had started sanding the clear off. It also had exhaust holes that were cut out by the last owner for his monster power, and holes from 2 f-ugly plastic bayliner looking swim platforms. All of which had to be filled. I plan on a Extreme Marine platform in the future.
Last edited by Shah Mat; 06-16-2004 at 10:16 PM.
#2
Registered
Thread Starter
Re: Project Complete... Painting my Checkmate
More peeling clear, look how bad the yellow stripe looks in the first pic. In #3, I started filling holes. I LOVE fiberglass work.
Last edited by Shah Mat; 06-16-2004 at 10:32 PM.
#3
Registered
Thread Starter
Re: Project Complete... Painting my Checkmate
Ready to goto the paint shop. They did the final sanding on my glass work, and put 3 painters on this at once while spraying the yellow.
Last edited by Shah Mat; 06-16-2004 at 09:59 PM.
#4
Registered
Thread Starter
Re: Project Complete... Painting my Checkmate
After the yellow, they sprayed the black, then the white. Ready to go home, I had them put on the decals first.
#5
Registered
Thread Starter
Re: Project Complete... Painting my Checkmate
Done, ready to go. I'm still waiting on some rubrail for the transom. It was cut for the exhaust holes that got filled.
Last edited by Shah Mat; 06-16-2004 at 10:03 PM.
#6
Forum Regulator
VIP Member
Re: Project Complete... Painting my Checkmate
Having seen this boat in the water since completion, I can you this boat looks FANTASTIC. Nice work Joey.
#7
Registered
Thread Starter
Re: Project Complete... Painting my Checkmate
And the next project on the chalkboard is................
Out with the old.....
Out with the old.....
#8
Registered
Thread Starter
Re: Project Complete... Painting my Checkmate
And in with the new. Adding 150hp should wake this little C-mate up!!
I also want to clean up the engine compartment.
I also want to clean up the engine compartment.
Last edited by Shah Mat; 06-16-2004 at 10:40 PM.