How Much Horsepower Will Merc # 5 Hold
#11
arneson-industries.com
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Especially if you take a look at the SSM#5 photo you posted.
The propeller is totally exposed to someone getting in/out of the water through the rear of the boat and one does not have to guess what will happen if someone jumps off the back.
That drive is just as bad as ours was before we made a safety cover.
The propeller is totally exposed to someone getting in/out of the water through the rear of the boat and one does not have to guess what will happen if someone jumps off the back.
That drive is just as bad as ours was before we made a safety cover.
#12
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Originally Posted by open72
pm board member JASSMAN ,think he is selling a set of 5's. as for switching from bravo to anything else with a tranny ,engine relocation forward , transom work ,exhaust outlet work ,alot of work
check this months issue of powerboat , did a artical on the arneson /bravo . very good reading and info. but it also require alot of work , lowering engines , moving them forward, etc.here is a pic of #5's in action in the old lolliepops boat that JASSMAN bought at about 100mph. nice tail
this was behind KE 1000's![EEK!](/forums/images/smilies/eek.gif)
![Drool](/forums/images/smilies/drool.gif)
![Big Grin](/forums/images/smilies/biggrin.gif)
![EEK!](/forums/images/smilies/eek.gif)
![Big Grin](/forums/images/smilies/biggrin.gif)
#13
Registered
![Default](/forums/images/icons/icon1.gif)
Originally Posted by Rik
The engines do not move forward with the Arneson Bravo Conversion Kits.
The engines might drop lower in the boat, but that depends upon the current "X" dimension of the boat.
Our drive package requires less HP to operate and also weights far less, not to mention the cost vs. the Mercury SSM#5.
We have made a propeller cover so that no one will be impaled if they jumped off the back of the boat and landed onto the propeller.
The engines might drop lower in the boat, but that depends upon the current "X" dimension of the boat.
Our drive package requires less HP to operate and also weights far less, not to mention the cost vs. the Mercury SSM#5.
We have made a propeller cover so that no one will be impaled if they jumped off the back of the boat and landed onto the propeller.
if the boat has a blank transom ,should be real easy. wonder how my cig would do with a single arneson
![Confused](/forums/images/smilies/confused.gif)
#14
arneson-industries.com
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
The engines were mounted forward one inch due to the fact that they mechanic continued to use a “drive saver” that was on the engines when it had Bravo's and he wanted to continue to use them. The drive saver is 1" thick.
This was to provide more space between the rear of the blower and the engine hatch opening.
Without the addition of the drive saver the engines goes in the same for/aft location.
We are 52” OAL.
This was to provide more space between the rear of the blower and the engine hatch opening.
Without the addition of the drive saver the engines goes in the same for/aft location.
We are 52” OAL.
#15
Registered
![Default](/forums/images/icons/icon1.gif)
Originally Posted by Rik
The engines were mounted forward one inch due to the fact that they mechanic continued to use a “drive saver” that was on the engines when it had Bravo's and he wanted to continue to use them. The drive saver is 1" thick.
This was to provide more space between the rear of the blower and the engine hatch opening.
Without the addition of the drive saver the engines goes in the same for/aft location.
We are 52” OAL.
This was to provide more space between the rear of the blower and the engine hatch opening.
Without the addition of the drive saver the engines goes in the same for/aft location.
We are 52” OAL.
understood
![Smilie](/forums/images/smilies/smile.gif)