Airflow to Make Power By Mesa Balancing
#1
Registered
Thread Starter
Airflow to Make Power By Mesa Balancing
Here at Mesa Balancing, we have our own Cylinder Head Development Program with all porting, machining, and flowing done in house. We make custom fuel injected intakes for a variety of applications, from Turbo to Marine to Drag Racing. We are currently developing 12 and 14 degree cylinder heads for racing applications only that flow in excess of 530 cfm. Here's a 18 degree intake modified for Nextel Cup use.
And here we have an Oldsmobile cylinder head for Jet Boat Application.
A surfaced cylinder head with proper surface finish for marine and cometic gaskets.
We here at Mesa Balancing believe airflow is paramount when making power. Feel free to contact us regarding any of our custom cylinder head development work you may need. Please note we have hundreds of dyno hours with different cylinder head configurations, and we can help your next project run along as smoothly as possible. Thank you for your time and happy boating.
Mesa Balancing
1075 E 16th St
Hialeah, FL 33010
305-884-5368
www.mesabalancing.com
And here we have an Oldsmobile cylinder head for Jet Boat Application.
A surfaced cylinder head with proper surface finish for marine and cometic gaskets.
We here at Mesa Balancing believe airflow is paramount when making power. Feel free to contact us regarding any of our custom cylinder head development work you may need. Please note we have hundreds of dyno hours with different cylinder head configurations, and we can help your next project run along as smoothly as possible. Thank you for your time and happy boating.
Mesa Balancing
1075 E 16th St
Hialeah, FL 33010
305-884-5368
www.mesabalancing.com