do i have to repaint
#12
![Default](/forums/images/icons/icon1.gif)
Talk to Grafix Works in Ft Lauderdale. They are next to Intense Marine.. They did an awesome job on my boat.. They specialize in cigs. Talk to the owner Harold. Great work...
http://www.grafikworx.com/
He might be able to sand it off and maybe you will want to throw a couple of clears on top of it. I don't know but this guy will. Top knotch work.
http://www.grafikworx.com/
He might be able to sand it off and maybe you will want to throw a couple of clears on top of it. I don't know but this guy will. Top knotch work.
#13
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
thanks everyone this is all really appreciated OPEN72 yes i can feel a thick edge on the graphics. the main color of the boat is great, ya can even shave from it. but if your referring as feeling the edge as in ya can tell the difference between the main color of the hull and the graphics yes ya can. so i'm guessing ya can remove the graphics by sand off .i think my old man wants to have the boat all white and then put some vinyl scheme on it.
donz jr mike
donz jr mike
#14
Registered
![Default](/forums/images/icons/icon1.gif)
if you feel a thick edge then the hullsides and deck are not cleared. that saves a bunch of work. the graphics can be sanded off. i would use a 80 grit to knock of the bulk and then 180. there is a great product called dura-tec. it's a vinylester product that is activated with mek. properly clean with acetone and apply. after it cures block with a 320 grit and then you are ready for new paint. dura-tec works great . need any other info or ???'s just
pm me.
http://www.atlcomposites.com/product...dsurfacing.htm
pm me.
http://www.atlcomposites.com/product...dsurfacing.htm
Last edited by open87; 09-30-2004 at 08:55 PM.
#15
Charter Member #232
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
That boat is PROBABLY NOT GEL COATED!!! It is more then likely painted. You will likely have to sand and respray it. Take it to a good paint guy to find out for sure.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#16
Registered
Join Date: Apr 2003
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
If the white is Gel than you can use a product called Klen strip fiberglass safe and a razor blade to remove the graphics but be very careful, then you can wet sand and buff.
#17
![Default](/forums/images/icons/icon1.gif)
Originally Posted by thedonz
thanks everyone this is all really appreciated OPEN72 yes i can feel a thick edge on the graphics. the main color of the boat is great, ya can even shave from it. but if your referring as feeling the edge as in ya can tell the difference between the main color of the hull and the graphics yes ya can. so i'm guessing ya can remove the graphics by sand off .i think my old man wants to have the boat all white and then put some vinyl scheme on it.
donz jr mike
donz jr mike
#18
![Default](/forums/images/icons/icon1.gif)
Frank,
Call these guys, http://www.enviro-strip.com/ they are at Jackson Marine Center in Lauderdale, on the New River, right off I-95. They can take a look at it, and tell you if it can be done. I used to store a boat with them, and they are great people to deal with.
Rick
Call these guys, http://www.enviro-strip.com/ they are at Jackson Marine Center in Lauderdale, on the New River, right off I-95. They can take a look at it, and tell you if it can be done. I used to store a boat with them, and they are great people to deal with.
Rick
#19
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
hey guys thanks let's what my old man says/ and thinks cause i know he wants to do it soon or later but once again thanks for all the 411 yall great
donz jr mike
donz jr mike