#6 Drives Polished or ??
#2
Registered
Re: #6 Drives Polished or ??
Ya......all the time you can't boat because you have to keep them polished!
Seriously, I don't think it would affect performance at all and sure would look b!tchin'! Just a pain in the butt to keep the up though.
-BF
(cahotrodboy on HotBoat)
Seriously, I don't think it would affect performance at all and sure would look b!tchin'! Just a pain in the butt to keep the up though.
-BF
(cahotrodboy on HotBoat)
Last edited by Baja Fresh; 12-03-2004 at 09:19 AM.
#3
Registered
Thread Starter
Join Date: Oct 2004
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Re: #6 Drives Polished or ??
Originally Posted by Baja Fresh
Ya......all the time you can't boat because you have to keep them polished!
#5
Platinum Member
Platinum Member
Re: #6 Drives Polished or ??
SSTahoe,
What are you running for Power with those #6's and what speeds are you achieving?
Thanks, have interest due to a friend working on a similar set-up.
Cougarman
What are you running for Power with those #6's and what speeds are you achieving?
Thanks, have interest due to a friend working on a similar set-up.
Cougarman
#6
Registered
Thread Starter
Join Date: Oct 2004
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Re: #6 Drives Polished or ??
The boat had merc 800SC , but one was bad so we are rebuilding both motors. They should be around 1000-1100 hp Injected on the dyno. I don't know the speed....Im hoping for mid 90's but we will have to see
#7
Registered
Thread Starter
Join Date: Oct 2004
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Re: #6 Drives Polished or ??
Originally Posted by Baja Fresh
In that case, leave them polished (and post pics in uncensored section) !
#10
Registered
Re: #6 Drives Polished or ??
Originally Posted by SSTahoe
I will have to pay to get on that section soo give me a couple days and I will see what i can come up with for pic's...........looks like it might be a wine & dine weekend for MissTahoe ....lets hope it works
Hey, just e-mail them to me and I'll post them up!
In regards to Minden/Gardnerville, how far is it to Tahoe and how is it as far as launch ramps, slips, etc? Isn't there another smaller lake nearby too?