New gauges and controls Cig cafe
#21
Platinum Member
Platinum Member
Thread Starter
Re: New gauges and controls Cig cafe
Originally Posted by caveman
I know its not a Cig!!
I redid My Hustler with Livorsi.
Cost was approx $3500.00
I did all the work including Custom painting the new panels.
Just goes to show you anyone can do it.
Oh Yeah Much Beer is required
I redid My Hustler with Livorsi.
Cost was approx $3500.00
I did all the work including Custom painting the new panels.
Just goes to show you anyone can do it.
Oh Yeah Much Beer is required
#22
Platinum Member
Platinum Member
Thread Starter
Re: New gauges and controls Cig cafe
Originally Posted by DanB
The 3 powder coated/etched panels were $325. All the toggles with the boots were $200. Bezels were about $200. I only bought a few new gauges. Dont remember the cost. Shifters and cables were around $600
#24
Registered
Join Date: Nov 2004
Location: Fairport Harbor OH
Posts: 2,423
Likes: 0
Received 0 Likes
on
0 Posts
Re: New gauges and controls Cig cafe
Scott when I was looking everywhere for pricing on the battery boxes, Trick Marine had the lowest prices out there. Take a look at his site. Just in the short time we've (ok, me more than Rob) have been on OSO, Trick Marines's name pops up quite a bit in the "real good" category so check it out!
They also had a good write up in this month's Family Boating. Make sure you read it next time you're over.
BC
They also had a good write up in this month's Family Boating. Make sure you read it next time you're over.
BC
#26
Registered
Gold Member
Join Date: Nov 2002
Location: chesapeake
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Re: New gauges and controls Cig cafe
pantera i emailed you about a cafe racer that i might be interested in selling. super nice everthing is new. runs a reliable 83 every day and has seen 86 on livorsi gps speedo. 1989 boat that looks like a 2004. will not disapoint. $79,000 call or email allan 757-718-7761 [email protected]
#27
Re: New gauges and controls Cig cafe
Originally Posted by caveman
I know its not a Cig!!
I redid My Hustler with Livorsi.
Cost was approx $3500.00
I did all the work including Custom painting the new panels.
Just goes to show you anyone can do it.
Oh Yeah Much Beer is required
I redid My Hustler with Livorsi.
Cost was approx $3500.00
I did all the work including Custom painting the new panels.
Just goes to show you anyone can do it.
Oh Yeah Much Beer is required
That is nice !!!
#28
Registered
Join Date: Aug 2004
Location: Cleveland, Ohio
Posts: 1,842
Likes: 0
Received 0 Likes
on
0 Posts
Re: New gauges and controls Cig cafe
Originally Posted by a smith
pantera i emailed you about a cafe racer that i might be interested in selling. super nice everthing is new. runs a reliable 83 every day and has seen 86 on livorsi gps speedo. 1989 boat that looks like a 2004. will not disapoint. $79,000 call or email allan 757-718-7761 [email protected]
#29
Guest
Posts: n/a
Re: New gauges and controls Cig cafe
Originally Posted by Too Old
I can give you smoking prices on Livorsi. I'm one of a few distributors spread around the country and stock a huge selection of Livorsi product. I supply several OEMs with their gauges and can put together any custom gauges you might be interested in. Everything from custom colored rims, custom faces, custom logos, standard or monster gauges, we're capable of puttong it together for you.
Panels are fairly straight forward. I'd do the work myself and save a bundle.
Fred
Panels are fairly straight forward. I'd do the work myself and save a bundle.
Fred
whats in going in
#30
Registered
Join Date: Apr 2003
Location: Lake George N.Y.
Posts: 1,530
Likes: 0
Received 0 Likes
on
0 Posts
Re: New gauges and controls Cig cafe
Originally Posted by caveman
I know its not a Cig!!
I redid My Hustler with Livorsi.
Cost was approx $3500.00
I did all the work including Custom painting the new panels.
Just goes to show you anyone can do it.
Oh Yeah Much Beer is required
I redid My Hustler with Livorsi.
Cost was approx $3500.00
I did all the work including Custom painting the new panels.
Just goes to show you anyone can do it.
Oh Yeah Much Beer is required