Going fast in "V" in Rhode Island
02-03-2005, 08:52 AM
#32
Platinum Member
Platinum MemberThread Starter
Re: Going fast in "V" in Rhode Island
Originally Posted by Chris288
How many ponies were the Racecrafters @ the last attemp,, somewhere around 1,800 ??? I would think 2,000's should do it..
02-03-2005, 05:26 PM
#35
arneson-industries.com
Offshoreonly Advertiser
Re: Going fast in "V" in Rhode Island
Originally Posted by GLH
They made 0 HP from what I hear...
563-590-7223
He states that there were three (3) engines there and none of them had a mechanical problem and they never used the spare engine that was in the truck as the contract stated.
There is two sides to the story but Tsciggfrie says the boat didn't perform due to the boat not the engines.
Time to substantiate facts not rumors.
02-03-2005, 06:16 PM
#36
Re: Going fast in "V" in Rhode Island
Just when I think JCPERF found the perfect avatar he steps up to the plate and once again surpasses the previous one 
Keep up the good work
Keep up the good work
02-03-2005, 06:38 PM
#37
Platinum Member
Platinum MemberThread Starter
Re: Going fast in "V" in Rhode Island
Originally Posted by Rik
...There is two sides to the story but Tsciggfrie says the boat didn't perform due to the boat not the engines...
Time to substantiate facts not rumors.
Time to substantiate facts not rumors.
02-03-2005, 07:06 PM
#38
arneson-industries.com
Offshoreonly Advertiser
Re: Going fast in "V" in Rhode Island
But, XXX is not the boat that they brought to NC.
I posted the phone #, use it and report back.
I posted the phone #, use it and report back.
02-03-2005, 07:21 PM
#39
Platinum Member
Platinum MemberThread Starter
Re: Going fast in "V" in Rhode Island
Originally Posted by Rik
But, XXX is not the boat that they brought to NC.
I posted the phone #, use it and report back.
I posted the phone #, use it and report back.
02-03-2005, 07:25 PM
#40
Registered
Re: Going fast in "V" in Rhode Island
Bob Russel's boat was the one they used, which has been around since the early part of last summer. I guess we will all have to wait and see what happens!
