Otis off to the poker run with Mesa power
#11
Platinum Member
Platinum Member
Re: Otis off to the poker run with Mesa power
Originally Posted by MYPANTERA28
The crew at Mesa got those motors and rigging done in two and half weeks with the boat show in the middle.
#13
VIP Member
VIP Member
Re: Otis off to the poker run with Mesa power
Originally Posted by boot
NICE !
For those that haven't met Laz, HE is a first class guy ! I met him at Miami show . Thanks your time Laz, Joe
For those that haven't met Laz, HE is a first class guy ! I met him at Miami show . Thanks your time Laz, Joe
__________________
Happily retired and living in Heavens waiting room.
Happily retired and living in Heavens waiting room.
#15
Platinum Member
Platinum Member
Re: Otis off to the poker run with Mesa power
Sweet mills, now that POS will be faster than me...
Talked to Bob this morning cutting it close but he made it.
Talked to Bob this morning cutting it close but he made it.
#16
AT Cult Member #3
VIP Member
Re: Otis off to the poker run with Mesa power
Laz, Sweet Bullets!! Nice job. Thanks for the t-shirt at the show. Can I get one of those blown 4.3's for my Jimmy?
#17
Registered
Re: Otis off to the poker run with Mesa power
LAS MESA IS THE MAN !!
His committment to get me finished and running in the run was second to nobody. I mean no disrespect to any of the other builders that I talked with before going with Las, but after the screwing I took from National, I was actually scared to have this project done. I didnt want to get screwed again. Las has fast become a friend of mine because of the way he has been upfront and dead nuts honest with me, and to top it off he builds a great product. He is the most stand up guy that I have meet in this business and his name will be right up there with the other 4-5 top builders in a very short time
Bob Scanlon
His committment to get me finished and running in the run was second to nobody. I mean no disrespect to any of the other builders that I talked with before going with Las, but after the screwing I took from National, I was actually scared to have this project done. I didnt want to get screwed again. Las has fast become a friend of mine because of the way he has been upfront and dead nuts honest with me, and to top it off he builds a great product. He is the most stand up guy that I have meet in this business and his name will be right up there with the other 4-5 top builders in a very short time
Bob Scanlon
Last edited by otis311; 03-03-2005 at 10:54 AM.
#18
VIP Member
VIP Member
Re: Otis off to the poker run with Mesa power
That's great news, glad it went well for you. Any info on speed increase....or is that classified???
__________________
Happily retired and living in Heavens waiting room.
Happily retired and living in Heavens waiting room.
#19
Registered
Re: Otis off to the poker run with Mesa power
Originally Posted by craig223
That's great news, glad it went well for you. Any info on speed increase....or is that classified???
Never got it dialed in. Turned 4 500 and saw 73 mph. We have it chipped for 5500. Eitherwe are way off with the 5 blade props or we have a linkage issue. Not sure, but the experts are working on it