Otis off to the poker run with Mesa power
#21
Platinum Member
Platinum Member
Join Date: Apr 2001
Location: Saratoga Springs, N.Y.
Posts: 2,910
Likes: 0
Received 0 Likes
on
0 Posts
Re: Otis off to the poker run with Mesa power
Bob, Congrats, after all you have been through hope your finally enjoying your new ride!!!!
#23
Registered
Thread Starter
Re: Otis off to the poker run with Mesa power
Thanks for the kind words thats what makes this crazy business were in all worth while I'm proud to say we give every project the attention we do because I only want to do one at a time. Also I spoke to Johny at TNT CUSTOM RIGGING yesterday and they are going to be doing all of our installs now that is the greatest group of guys there you can deal with . Sincerely Laz
#25
Performance Boat Center
VIP Member
Re: Otis off to the poker run with Mesa power
Hey Bob...
Told ya so buddy...
They look great. 625s right?
Told ya so buddy...
They look great. 625s right?
__________________
Tim Gallagher
Performance Boat Center-FL
[email protected]
954-809-8739
Wright Performance, MTI, Cigarette, Sunsation
Tim Gallagher
Performance Boat Center-FL
[email protected]
954-809-8739
Wright Performance, MTI, Cigarette, Sunsation
#26
Platinum Member
Platinum Member
Re: Otis off to the poker run with Mesa power
Originally Posted by Tim G.
Hey Bob...
Told ya so buddy...
They look great. 625s right?
Told ya so buddy...
They look great. 625s right?
Bob posted this in the tech section a bit back... looks like 725 HP
Originally Posted by otis311
Here is my dyno sheet from My 572 ci 700hp n/a motors that Las Mesa is building for me to go into my 2000 Tiger.
I m not a motor head, so I figured Id post the results and let the experts here post there comments
RPM HP TORQUE
3040 375.0 647.8
3114 391.8 650.7
3201 417.0 684.3
3301 457.9 728.6
3410 471.3 725.9
3507 470.9 705.2
3604 478.7 697.5
3712 488.8 691.6
3809 492.1 678.6
4005 511.8 671.1
4116 524.9 669.7
4205 538.0 672.0
4313 558.4 679.9
4402 578.0 689.6
4517 597.7 694.9
4602 609.9 696.0
4702 620.8 693.4
4803 634.8 694.1
4903 656.3 703.0
5008 674.1 707.0
5112 691.6 710.5
5208 698.9 704.8
5307 712.8 705.4
5409 723.3 702.3
5501 726.3 693.4
5603 716.7 671.8
5704 713.1 656.6
5801 711.9 644.5
5904 711.3 632.8
Las is going to set the rev limiter at 5600.
I m not a motor head, so I figured Id post the results and let the experts here post there comments
RPM HP TORQUE
3040 375.0 647.8
3114 391.8 650.7
3201 417.0 684.3
3301 457.9 728.6
3410 471.3 725.9
3507 470.9 705.2
3604 478.7 697.5
3712 488.8 691.6
3809 492.1 678.6
4005 511.8 671.1
4116 524.9 669.7
4205 538.0 672.0
4313 558.4 679.9
4402 578.0 689.6
4517 597.7 694.9
4602 609.9 696.0
4702 620.8 693.4
4803 634.8 694.1
4903 656.3 703.0
5008 674.1 707.0
5112 691.6 710.5
5208 698.9 704.8
5307 712.8 705.4
5409 723.3 702.3
5501 726.3 693.4
5603 716.7 671.8
5704 713.1 656.6
5801 711.9 644.5
5904 711.3 632.8
Las is going to set the rev limiter at 5600.
Thread
Thread Starter
Forum
Replies
Last Post
MESABALANCING
General Boating Discussion
0
07-27-2004 09:59 AM